Refer to the exhibit. The network shown in the diagram is experiencing connectivity problems. Which of the following will correct the problems? (Choose two.)
A.
Configure the gateway on Host A as 10.1.1.1.
B.
Configure the gateway on Host B as 10.1.2.254.
C.
Configure the IP address of Host A as 10.1.2.2.
D.
Configure the IP address of Host B as 10.1.2.2.
E.
Configure the masks on both hosts to be 255.255.255.224.
F.
Configure the masks on both hosts to be 255.255.255.240.
The switch 1 is configured with two VLANs: VLAN1 and VLAN2.
The IP information of member Host A in VLAN1 is as follows:
Address: 10.1.1.126
Mask: 255.255.255.0
Gateway: 10.1.1.254
The IP information of member Host B in VLAN2 is as follows:
Address: 10.1.1.12
Mask: 255.255.255.0
Gateway: 10.1.1.254
The configuration of sub-interface on router 2 is as follows:
Fa0/0.1 – 10.1.1.254/24 VLAN1
Fa0/0.2 – 10.1.2.254/24 VLAN2
It is obvious that the configurations of the gateways of members in VLAN2 and the associated network segments are wrong. The Iayer3 addressing information of Host B should be modified as follows:
Address: 10.1.2.X
Mask: 255.255.255.0
0
0
I have the same idea.
0
0