You issue the no auto-reg-ephone command on a CME router.
Which of the following is true? (Select the best answer.)
A.
No phones can automatically register with CME.
B.
Phones explicitly listed in the configuration can automatically register with CME.
C.
Phones can be registered in CME only by using the webbased GUI.
D.
The MAC addresses of phones that cannot automatically register will not be recorded.
Explanation:
Only phones that are explicitly listed in the Cisco Unified Communications Manager Express (CME)
configuration can automatically register with CME if you issue the no autoregephone command on a CME
router. When the no autoregephone command is issued in telephonyservice configuration mode, phones that
do not have a Media Access Control (MAC) address explicitly listed in the configuration will be blocked and not
able to automatically register with CME. However, phones with MAC addresses that are explicitly listed in the
configuration will still be able to automatically register.
The autoregephone command, which is issued by default on a CME router, configures a router to automatically
assign an ephone to an IP phone even if the phone’s MAC address is not explicitly listed in the configuration.
When an IP phone registers with a router that is configured with the autoregephone command, the router will
associate the MAC address of the IP phone with the first unassigned ephone on the router. If all the ephones
on the router are associated with IP phones, the router will create a new ephone, provided that the number of
configured ephones does not exceed the value of the max-ephonecommand.
On a Cisco 1700 router that is running IOS 12.4(4)XC, the CME graphical user interface (GUI) will display a
dialog box that includes the words “no new phone to add” and a button labeled OK if you attempt to add a
phone when autoregistration has been disabled on the router. Autoregistration can be disabled by issuing the
no autoregephone command in telephonyservice configuration mode in the router’s commandline interface
(CLI). However, you can register phones in ways other than the CME webbased GUI if auto-registration is
disabled. For example, you can issue the macaddressmacaddresscommand in ephone configuration mode in
the CLI to manually register an IP phone with CME. The only workaround for the CME GUI error is to enable
autoregistration by issuing the autoregephone command in telephonyservice configuration mode in the CLI.
The MAC addresses of phones that cannot automatically register will be recorded by the CME router if the no
autoregephone command has been issued on the CME router. In this scenario, IP phones that are not explicitly
listed in the configuration are blocked by CME when they attempt to automatically register. CME records the
MAC address of each blocked IP phone. You can display a list of blocked IP phones by issuing the show
ephone attemptedregistrations command in privileged EXEC mode. You can erase the record of blocked IP
phone registration attempts by issuing the clear telephonyservice ephoneattemptedregistrations command in
privileged EXEC mode.https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/
cme_a1ht.html#wp3432972036
https://www.cisco.com/c/en/us/td/docs/ios/12_4/12_4x/release/notes/rn1700xc.html#wp281798
(9/Jan/2018 Updated) New 210-060 Exam Questions:
NEW QUESTION 238
A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
D. User Reports > Bills > Individual
Answer: D
NEW QUESTION 239
An engineer must ensure that user data is maintained in lightweight directory access protocol and copied to Cisco Unity Connection, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation option accomplishes this task?
A. bulk administration
B. import from CUCM via AXL
C. import from LDAP
D. manual creation
Answer: A
NEW QUESTION 240
An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator
Answer: D
NEW QUESTION 241
Which component allows Cisco Jabber to communicate with clients who are outside the corporate network?
A. Cisco Extension Mobility
B. Cisco TMS
C. Cisco Mobility Remote Destination
D. Cisco Unified RTMT
E. Cisco Mobile and Remote Access
Answer: A
NEW QUESTION 242
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
NEW QUESTION 243
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days. Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A
0
0
NEW QUESTION 244
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)
A. Survivable Remote Site Telephony is configured on the branch router.
B. LAN failover configuration is set to Survivable Remote Site Telephony.
C. Call Forward UnRegistered option is configured on each branch phone profile.
D. POTS WAN failover is set to Survivable Remote Site Telephony.
E. An ISDN is configured as a primary survivable backup site.
Answer: CE
NEW QUESTION 245
A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?
A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile.
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile.
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile.
D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile.
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
Answer: C
NEW QUESTION 246
A user reports that during calls they hear excessive hissing when neither party is talking. Which option is one cause of this noise?
A. QoS
B. LoPS
C. VAD
D. EPL
E. SRST
Answer: C
NEW QUESTION 247
What are three ways for an administrator to create users in Cisco Unity Connection? (Choose three.)
A. use the Bulk Administration Tool
B. import from Cisco Unified Communications Manager Express
C. import from a Microsoft Word document
D. import from an Adobe PDF document
E. use manual creation
F. import from a Microsoft Outlook contacts list
G. import from LDAP
Answer: ABG
NEW QUESTION 248
A user directory number is configured to forward all calls to a cell phone, but calls are not successfully forwarding. Which Cisco Unified Communications Manager setting requires reconfiguration?
A. DN External Mask
B. DN Route Partition
C. DN Calling Search Space
D. CFA Calling Search Space
Answer: D
0
0
What’s more, part of the new 254Q 210-060 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE
Best Regards!
0
0