You want to add a user to a CME router. The router has been assigned the IP address of 192.168.51.50. Which
of the following interfaces cannot be used to accomplish your task? (Select the best answer.)
A.
CCP
B.
CLI
C.
http://192.168.51.50/ccme.html
D.
TUI
Explanation:
You cannot use the telephone user interface (TUI) to add a user to the Cisco Unified Communications Manager
Express (CME) router. The TUI is a voice-prompted interface that enables users to perform actions by pressing
a number or a specific sequence of numbers on a telephone keypad. A typical function for a TUI on a Voice
over IP (VoIP) system is to enable voice mail users to authenticate to the voice mail system and check
messages. You can also use a telephone’s keypad to perform some configuration tasks, such as modifying
network settings or restarting an IP phone.
You can use Cisco Configuration Professional (CCP) to add a user to the CME router. You should click
Configure > Unified Communications > Users, Phones, and Extensions > Phones and Users in the graphical
user interface (GUI) to add a user or to add a phone if you are using CCP. CCP is a graphical device
management tool that is installed as an application on a Windows computer. CCP can be used to configure
voice systems, such as CME routers, and other Cisco networking products. When properly installed and
configured, CCP enables you to make configuration changes to phones or users by modifying the options on
the Phones and Users summary page. You can create, edit, delete, restart, and reset one or more phones from
the Phones and Users summary page in CCP. In addition, you can create, edit, and delete one or more phone
system users from the Phones and Users summary page in CCP.
You can use the CME commandline interface (CLI) to add a user to the CME router. To create a phone user by
using the CLI, issue the username usernamepassword password command in ephone configuration mode,
where username is the user name that you want to assign to the user and password is the password that you
want to assign to the user. You should issue the username usernamepassword password command only in
ephone configuration mode of the device that you want to assign to the user you are creating. For example, if
you want user John to be able to manage the device settings of ephone 5 by using the CME GUI, you should
issue the following commands on the CME router:
CME1(config)#ephone 5
CME1(configephone)#username john password b0s0n
The ephone 5 command places the router into ephone configuration mode for ephone 5. The username john
password b0s0n command creates a new user name of john for ephone 5 and assigns that user name the
password b0s0n.
You can use the web address of http://192.168.51.50/ccme.html to add a user to the CME router in thisscenario. CME routers support the configuration of phones and users by using a webbased GUI. After the GUI
is enabled, you can access it by typing the CME router’s IP address followed by /ccme.html into a browser’s
location bar. To create a phone user account in the CME GUI, you should click Configure Phones Add Phone,
which opens the Add Phone window. In the Login Account area of the Add Phone window, assign the phone
user a user name and password and then associate the phone user with either an existing device or a new
device? you can create a new device by filling out the devicerelated fields in the Add Phone window.https://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/cisco_configuration_professional/v2_5/olh/
ccp.pdf#page=1236
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucme/gui/user/guide/cmegui_user.pdf#page=6
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/
cme_u1ht.html#wp1020821455
New 210-060 Exam Questions and Answers Updated Recently (9/Jan/2018):
NEW QUESTION 238
A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
D. User Reports > Bills > Individual
Answer: D
NEW QUESTION 239
An engineer must ensure that user data is maintained in lightweight directory access protocol and copied to Cisco Unity Connection, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation option accomplishes this task?
A. bulk administration
B. import from CUCM via AXL
C. import from LDAP
D. manual creation
Answer: A
NEW QUESTION 240
An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator
Answer: D
NEW QUESTION 241
Which component allows Cisco Jabber to communicate with clients who are outside the corporate network?
A. Cisco Extension Mobility
B. Cisco TMS
C. Cisco Mobility Remote Destination
D. Cisco Unified RTMT
E. Cisco Mobile and Remote Access
Answer: A
0
0
NEW QUESTION 242
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
NEW QUESTION 243
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days. Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A
NEW QUESTION 244
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)
A. Survivable Remote Site Telephony is configured on the branch router.
B. LAN failover configuration is set to Survivable Remote Site Telephony.
C. Call Forward UnRegistered option is configured on each branch phone profile.
D. POTS WAN failover is set to Survivable Remote Site Telephony.
E. An ISDN is configured as a primary survivable backup site.
Answer: CE
NEW QUESTION 245
A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?
A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile.
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile.
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile.
D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile.
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
Answer: C
NEW QUESTION 246
A user reports that during calls they hear excessive hissing when neither party is talking. Which option is one cause of this noise?
A. QoS
B. LoPS
C. VAD
D. EPL
E. SRST
Answer: C
0
0
BTW, part of the new 254Q 210-060 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE
Best Regards!
0
0