You issue the showrunning config command on a CME router and receive the following partial output:
A caller dials 3021234.
Which of the following dial peers will the router use? (Select the best answer.)
A.
1
B.
2
C.
3
D.
4
Explanation:
The Cisco Unified Communications Manager Express (CME) router will use dial peer 4 to route the voice data
when a caller dials 3021234. When a caller dials 3021234, the router collects the digits as the caller dials them.
The router compares the dialed digits against dial peer destination patterns on a digitbydigit basis. Because dial
peer 4 most specifically matches the dialed string 302, the router will immediately process the call by using dial
peer 4 as soon as the caller completes the 302 sequence of characters.
If multiple dial peers explicitly match the destination pattern, the most specific match for the pattern will be
used. For example, if dial peer 4 were removed from this scenario, a caller dialing 3021234 would immediately
match all three of the remaining dial peers. Dial peer 3, because it explicitly defines the dialed string, would be
the most specific match. Dial peer 1, because its destination pattern contains seven wildcards, would be the
least specific match.
The router will not use dial peer 3 to route the voice data when a caller dials 3021234. Although dial peer 3 is
the most specific destination pattern match for the entire string of dialed digits, the router will process the most
specific match on a digitbydigit basis. Therefore, the router will process the call as soon as dial peer 4 is
matched, before the caller has had a chance to complete the full sevendigit string.
The router will not use dial peer 1 or dial peer 2 to route the voice data when a caller dials 3021234. Although
the destination pattern configured for dial peer 1 would match any sevendigit dialed string, the destination
pattern is not the most specific match for 3021234. Similarly, the destination pattern configured for dial peer 2
would match the dialed string, but it is a less specific match than dial peer 4, because four of the seven digits in
the dial peer 2 destinationpattern command are wildcards.https://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/14074-in-dial-peer-match.html#topic9
New 210-060 Exam Questions and Answers Updated Recently (9/Jan/2018):
NEW QUESTION 238
A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
D. User Reports > Bills > Individual
Answer: D
NEW QUESTION 239
An engineer must ensure that user data is maintained in lightweight directory access protocol and copied to Cisco Unity Connection, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation option accomplishes this task?
A. bulk administration
B. import from CUCM via AXL
C. import from LDAP
D. manual creation
Answer: A
NEW QUESTION 240
An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator
Answer: D
0
1
NEW QUESTION 241
Which component allows Cisco Jabber to communicate with clients who are outside the corporate network?
A. Cisco Extension Mobility
B. Cisco TMS
C. Cisco Mobility Remote Destination
D. Cisco Unified RTMT
E. Cisco Mobile and Remote Access
Answer: A
NEW QUESTION 242
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
NEW QUESTION 243
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days. Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A
NEW QUESTION 244
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)
A. Survivable Remote Site Telephony is configured on the branch router.
B. LAN failover configuration is set to Survivable Remote Site Telephony.
C. Call Forward UnRegistered option is configured on each branch phone profile.
D. POTS WAN failover is set to Survivable Remote Site Telephony.
E. An ISDN is configured as a primary survivable backup site.
Answer: CE
NEW QUESTION 245
A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?
A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile.
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile.
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile.
D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile.
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
Answer: C
0
0
Besides, part of the new 254Q 210-060 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE
Best Regards!
0
0