DRAG DROP
Click and drag the network devices from the left to their appropriate descriptions on the right.
Select and Place:

Answer:

Explanation:
The following are some of the network devices and their corresponding functions:
Hub: Regenerates a signal when it passes through its ports. Hubs provide a common connection point for
network devices. Hubs are generally used for LAN connectivity and works at Layer 1 of the OSI model.
Firewall: Protects the network from unauthorized access attempts. It is typically placed between the Internet
and a private network, but can also be placed between two private networks.
Router: Provides a means for connecting LAN and WAN segments together. A router separates broadcast
domains while connecting different logical and physical networks.
Switch: Provides a separate collision domain for each node in a company’s internal network. Switches work
at Layer 2 in the Open System Interconnection (OSI) model and perform their function by observing the
source and destination MAC addresses of packets. Because of this method of operation, it can provide
dedicated bandwidth to each connected node. Advantages of switches over hubs include the ability to filter
frames based on MAC addresses and to allow simultaneous frame transmissions. The diagram below
illustrates the ability of a switch to provide a separate collision domain to each device, as compared to the
hub, which cannot.

Objective:
Network Fundamentals
Sub-Objective:
Describe the impact of infrastructure components in an enterprise network

Cisco Documentation > Internetwork Design Guide > Internetworking Design Basics