Which cannot be enabled when creating an Access Policy entry?

A.
Setting thetcp-mss size

B.
Applying NAT using DIP pools

C.
Logging all connections that match the Access Policy

D.
Triggering a traffic alarm if traffic goes above 300 Bytes/Sec

E.
Scheduling the policy to take effect between Monday through Friday only

Explanation:

TCP-MSS- Sets the TCP-MSS (TCP-Maximum Segment Size) value for all TCP SYN packets for IPSecVPNtraffic.TheNetScreendevice modifies the MSS value in the TCP packet to avoid fragmentation caused by theIPSecoperation. This command is a global command and can not be set per policy.