Which three EIGRP routes will be present in the router R4’s routing table? (Choose three.)
A. 172.16.1.0/24
B. 10.1.10.0/30
C. 10.0.0.0/8
D. 10.1.11.0/30
E. 172.16.0.0/16
F. 192.168.1.0/24
3 Comments on “Which three EIGRP routes will be present in the router R4’s routing table?”
Henry Chansays:
Has the most trailing zeroes
0
0
Jimbosays:
Also, pay attention to R4’s output above. The “auto-summary” command is present which means that EIGRP is in the default state of “classful routing”. The command “no auto-summary” enables “classless routing” and would be displayed in the output as such. This would allow for the subnetting or VLSM routing.
1
0
Jimbosays:
Then note the “classful” route choices to pick from. Because EIGRP is not configured with “no auto-summary”, we can only choose “classful” networks.
0-127 Class A or /8
129-191 Class B or /16
192-223 Class C or /24
Choices C, E and F are the correct answers because of “classful” route summary.
10.0.0.0/8 = Class A
172.16.0.0/16 = Class B
192.168.1.0/24 = Class C
Has the most trailing zeroes
0
0
Also, pay attention to R4’s output above. The “auto-summary” command is present which means that EIGRP is in the default state of “classful routing”. The command “no auto-summary” enables “classless routing” and would be displayed in the output as such. This would allow for the subnetting or VLSM routing.
1
0
Then note the “classful” route choices to pick from. Because EIGRP is not configured with “no auto-summary”, we can only choose “classful” networks.
0-127 Class A or /8
129-191 Class B or /16
192-223 Class C or /24
Choices C, E and F are the correct answers because of “classful” route summary.
10.0.0.0/8 = Class A
172.16.0.0/16 = Class B
192.168.1.0/24 = Class C
1
0