The command show frame-relay map gives the following output:
Serial 0 (up): ip 192.168.151.4 dlci 122, dynamic, broadcast, status defined, active
Which statements represent what is shown?(Choose three.)
A.
192.168.151.4 represents the IP address of the remote router
B.
192.168.151.4 represents the IP address of the local serial interface
C.
DLCI 122 represents the interface of the remote serial interface
D.
DLCI 122 represents the local number used to connect to the remote address
E.
broadcast indicates that a dynamic routing protocol such as RIP v1 can send packets across
this PVC
F.
active indicates that the ARP process is working
DLCIs have local significance only. DLCI numbers are not advertised to other routers, and other routers can use the same DLCI numbers without causing connectivity issues.
Locally significant DLCIs have become the primary method of addressing, because the same address can be used in several different locations while still referring to different connections. Local addressing prevents a customer from running out of DLCIs as the network grows.
RIPv1 uses local broadcasts to share routing information.
When a RIP router comes online, it sends a broadcast Request Message on all of its RIP enabled interfaces. Consider RIPv1 as an example. .. route is learned on one permanent virtual circuit.
0
0
192.168.151.4 represents the IP address of the remote router, DLCI 122 represents the local number used to connect to the remote address, broadcast indicates that a dynamic routing protocol such as RIP v1 can send packets across this PVC
0
0
The Routing Information Protocol (RIP) is one of the oldest distance-vector routing protocols which employ the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from source to destination.
0
0