Your network contains four Network Policy Server (NPS) servers named Server1, Server2, Servers,
and Server4.
Server1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS
server group named Group1.
You need to ensure that Server2 and Server3 receive connection requests. Server4 must only receive
connection requests if both Server2 and Server3 are unavailable.
How should you configure Group1?

A.
Change the Weight of Server4 to 10.

B.
Change the Weight of Server2 and Server3 to 10.

C.
Change the Priority of Server2 and Server3 to 10.

D.
Change the Priority of Server4 to 10.

Explanation:
During the NPS proxy configuration process, you can create remote RADIUS server groups and then
add RADIUS servers to each group. To configure load balancing, you must have more than one
RADIUS server per remote RADIUS server group. While adding group members, or after creating a
RADIUS server as a group member, you can access the Add RADIUS server dialog box to configure
the following items on the Load Balancing tab:
Priority. Priority specifies the order of importance of the RADIUS server to the NPS proxy server.
Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number,
the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is
assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server
first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS
servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and
then use the Weight setting to load balance between them.
Weight. NPS uses this Weight setting to determine how many connection requests to send to each
group member when the group members have the same priority level. Weight setting must be
assigned a value between 1 and 100, and the value represents a percentage of 100 percent. For
example, if the remote RADIUS server group contains two members that both have a priority level of
1 and a weight rating of 50, the NPS proxy forwards 50 percent of the connection requests to each
RADIUS server.
Advanced settings. These failover settingsprovide a way for NPS to determine whether the remote
RADIUS server is unavailable. If NPS determines that a RADIUS server is unavailable, it can start
sending connection requests to other group members. With these settings you can configure the

number of seconds that the NPS proxy waits for a response from the RADIUS server before it
considers the request dropped; the maximum number of dropped requests before the NPS proxy
identifies the RADIUS server as unavailable; and the number of seconds that can elapse between
requests before the NPS proxy identifies the RADIUS server as unavailable.
The default priority is 1 and can be changed from 1 to 65535. So changing server 2 and 3 to priority
10 is not the way to go.

httpHYPERLINK “http://technet.microsoft.com/en-us/library/dd197433(WS.10).aspx#_blank”:
//technetHYPERLINK “http://technet.microsoft.com/en-us/library/dd197433(WS.10).aspx#_blank”.
microsoftHYPERLINK “http://technet.microsoft.com/en-us/library/dd197433(WS.10).aspx#_blank”.
cHYPERLINK “http://technet.microsoft.com/en-us/library/dd197433(WS.10).aspx#_blank”om/enus/library/dd197433(WSHYPERLINK “http://technet.microsoft.com/enus/library/dd197433(WS.10).aspx#_blank”. 10)HYPERLINK “http://technet.microsoft.com/enus/library/dd197433(WS.10).aspx#_blank”. aspx