You want to use the Cisco Configuration Professional site-to-site VPN wizard to implement a siteto-site IPsec VPN using pre-shared key.
Which four configurations are required (with no defaults)? (Choose four.)

A.
the interface for the VPN connection

B.
the VPN peer IP address

C.
the IPsec transform-set

D.
the IKE policy

E.
the interesting traffic (the traffic to be protected)

F.
the pre-shared key

Explanation:
http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080ba1d0
a.shtml
3. In the next window, provide the VPN Connection Information in the respective spaces. Choose
the interface of the VPN Tunnel from the drop-down menu. Here, FastEthernet0 is chosen. In the
Peer Identity section, choose Peer with static IP address and provide the remote peer IP address.
Then, provide the Pre-shared Keys (cisco123 in this example) in the Authentication section. Lastly,
click Next.

10. In the following window, provide the details about the Traffic to be protected through the VPN
Tunnel.
Provide the Source and Destination Networks of the traffic to be protected so that the traffic
between the specified source and destination networks are protected. In this example, the Source
network is 10.10.10.0 and the Destination network is 10.20.10.0. Click Next.