Which access list permits HTTP traffic sourced from host 10.1.129.100 port 3030 destined to host
192.168.1.10?

A.
access-list 101 permit tcp any eq 3030

B.
access-list 101 permit tcp 10.1.128.0 0.0.1 .255 eq 3030 192.1 68.1 .0 0.0.0.15 eq www

C.
access-list 101 permit tcp 10.1.129.0 0.0.0.255 eq www 192.168.1.10 0.0.0.0 eq www

D.
access-list 101 permit tcp host 192.1 68.1 .10 eq 80 10.1.0.0 0.0.255.255 eq 3030

E.
access-list 101 permit tcp 192.168.1.10 0.0.0.0 eq 80 10.1.0.0 0.0.255.255

F.
access-list 101 permit ip host 10.1.129.100 eq 3030 host 192.168.1.10 eq 80

Explanation:
www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note09186a00800a5b9a.shtm
l
Extended ACLs
Extended ACLs were introduced in Cisco IOS Software Release 8.3. Extended ACLs control traffic
by the comparison of the source and destination addresses of the IP packets to the addresses
configured in the ACL.
IP
access-list access-list-number
[dynamic dynamic-name [timeout minutes]]
{deny|permit} protocol source source-wildcard
destination destination-wildcard [precedence precedence]
[tos tos] [log|log-input] [time-range time-range-name]

ICMP
access-list access-list-number
[dynamic dynamic-name [timeout minutes]]
{deny|permit} icmp source source-wildcard
destination destination-wildcard
[icmp-type [icmp-code] |icmp-message]
[precedence precedence] [tos tos] [log|log-input]
[time-range time-range-name]
TCP
access-list access-list-number
[dynamic dynamic-name [timeout minutes]]
{deny|permit} tcp source source-wildcard [operator [port]]
destination destination-wildcard [operator [port]]
[established] [precedence precedence] [tos tos]
[log|log-input] [time-range time-range-name]
UDP
access-list access-list-number
[dynamic dynamic-name [timeout minutes]]
{deny|permit} udp source source-wildcard [operator [port]]
destination destination-wildcard [operator [port]]
[precedence precedence] [tos tos] [log|log-input]
[time-range time-range-name]