PrepAway - Latest Free Exam Questions & Answers

Which statement about PVLAN Edge is true?

Which statement about PVLAN Edge is true?

PrepAway - Latest Free Exam Questions & Answers

A.
PVLAN Edge can be configured to restrict the number of MAC addresses that appear on a
single port.

B.
The switch does not forward any traffic from one protected port to any other protected port.

C.
By default, when a port policy error occurs, the switchport shuts down.

D.
The switch only forwards traffic to ports within the same VLAN Edge.

Explanation:
http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a008017
acad.shtml
NotE. Some switches (as specified in the Private VLAN Catalyst Switch Support Matrix ) currently
support only the PVLAN Edge feature. The term “protected ports” also refers to this feature.

PVLAN Edge ports have a restriction that prevents communication with other protected ports on
the same switch. Protected ports on separate switches, however, can communicate with each
other. Do not confuse this feature with the normal PVLAN configurations that this document
shows. For more information on protected ports, refer to the Configuring Port Security section of
the document Configuring Port-Based Traffic Control.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_13_ea1/config
uration/guide/swtrafc.html
Configuring Protected Ports
Some applications require that no traffic be forwarded between ports on the same switch so that
one neighbor does not see the traffic generated by another neighbor. In such an environment, the
use of protected ports ensures that there is no exchange of unicast, broadcast, or multicast traffic
between these ports on the switch.
Protected ports have these features:
•A protected port does not forward any traffic (unicast, multicast, or broadcast) to any other port
that is also a protected port. Traffic cannot be forwarded between protected ports at Layer 2; all
traffic passing between protected ports must be forwarded through a Layer 3 device.
•Forwarding behavior between a protected port and a nonprotected port proceeds as usual.
The default is to have no protected ports defined.


Leave a Reply