— Exhibit –
— Exhibit —
Click the Exhibit button.
You have implemented a firewall-based VLAN filter to map traffic from subnet 192.168.40.0/24 to
a VLAN named vlan_40. However, you have not been successful in getting the traffic mapped
correctly. In addition, all traffic must be passed to the Layer 2 network.
Referring to the exhibit, which three commands are required to accomplish this behavior? (Choose
three.)
A.
set interfaces ge-0/0/19.0 family ethernet-switching filter output assign_vlan
B.
set interfaces ge-0/0/19.0 family ethernet-switching filter input assign_vlan
C.
set vlans vlan_40 interface ge-0/0/19.0 mapping policy
D.
set vlans vlan_30 interface ge-0/0/19.0 mapping policy
E.
set interfaces ge-0/0/20 unit 0 family ethernet-switching port-mode trunk vlan members all
Step 1 :
set vlans v11 vlan-id 11
set vlans v11 interface ge-0/0/0.0
set vlans v22 vlan-id 22
set vlans v22 interface ge-0/0/0.0 mapping policy
Step 2:
set firewall family ethernet-switching filter separate-vlans term 1 from source-address
set firewall family ethernet-switching filter separate-vlans term 1 then vlan v22
set firewall family ethernet-switching filter separate-vlans term 2 then accept
0
0
Step 3 :
set interface ge-0/0/0.0 family ethernet-switching filter input separate-vlans
0
0