— Exhibit —
user@router> show bgp summary
Groups: 1 Peers: 3 Down peers: 0
Table Tot Paths Act Paths Suppressed History Damp State Pending
inet.0 0 0 0 0 0 0
inet6.0 1 0 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped…

2001:ffff::3:3 65550 43 43 0 0 18:20 Establ
inet6.0: 0/1/1/0
2001:ffff::3:4 65550 42 43 0 0 18:16 Establ
inet6.0: 0/0/0/0
2001:ffff::9:7 65550 42 43 0 0 18:00 Establ
inet6.0: 0/0/0/0
user@router> show route receive-protocol bgp 2001:ffff::3:3
inet.0: 32 destinations, 33 routes (32 active, 0 holddown, 0 hidden)
__juniper_private1__.inet.0: 4 destinations, 4 routes (2 active, 0 holddown, 2 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 10 destinations, 14 routes (10 active, 0 holddown, 0 hidden)
Prefix Nexthop MED Lclpref AS path
2001:1:2::/64 2001:ffff::3:3 100 I
user@router> show route 2001:1:2::
inet6.0: 10 destinations, 14 routes (10 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
2001:1:2::/64 *[OSPF3/10] 01:54:11, metric 201
> to fe80::217:cb03:2448:bd00 via fe-0/0/1.804
[BGP/170] 00:18:43, localpref 100, from 2001:ffff::3:3
AS path: I
> to fe80::217:cb03:2448:bd00 via fe-0/0/1.804
user@router> show route advertising-protocol bgp 2001:ffff::9:7

user@router> show configuration protocols bgp
group ibgpv6 {
type internal;
local-address 2001:ffff::3:5;
cluster 10.0.3.4;
neighbor 2001:ffff::3:3;
neighbor 2001:ffff::3:4;
neighbor 2001:ffff::9:7;
}
user@router>
— Exhibit —
Click the Exhibit button.
You are using an IBGP route reflector within your network. Your route reflector has received the
2001:1:2::/64 prefix, but it is not advertising the prefix to its cluster members. After examining the
route reflector, you notice the output shown in the exhibit.
Which configuration statement causes the route reflector to transmit the route to its IBGP peers?

A.
set protocols bgp group ibgpv6 advertise-inactive

B.
set protocols bgp group ibgpv6 accept-remote-nexthop

C.
set protocols bgp group ibgpv6 multipath

D.
set protocols bgp group ibgpv6 include-mp-next-hop