6 Comments on “What is a valid router ID configuration for OSPFv3 in the Junos OS?”

1. Szabi says:

   December 7, 2015 at 11:29 pm

   The protocol specification for OSPFv3 mandates the use of a 32-bit router ID, which is the same value used by OSPFv2.

   It should be D

   
   
   
   0

   
   
   
   0
   1. asd says:

      December 21, 2015 at 12:41 pm

      http://www.juniper.net/documentation/en_US/junos15.1/topics/example/ospf-router-id-configuring.html

      C is correct

      
      
      
      0

      
      
      
      0
   2. asd says:

      December 21, 2015 at 12:43 pm

      Also, check where router-id can be used:

      http://www.juniper.net/documentation/en_US/junos13.2/topics/reference/configuration-statement/router-id-edit-routing-options.html

      
      
      
      0

      
      
      
      0
2. tuanna says:

   April 3, 2016 at 10:01 pm

   OSPFv3 Router IDs, Area IDs, and LSA link-state IDs remain at the OSPFv2 IPv4 size of 32 bits.
   Configure the OSPF router identifier by entering the [router-id] configuration value.
   [edit]
   user@host# set routing-options router-id x.x.x.x

   
   
   
   0

   
   
   
   0
3. fe says:

   August 9, 2016 at 9:18 pm

   router-id address;
   Hierarchy Level
   [edit logical-systems logical-system-name routing-instances routing-instance-name routing-options],
   [edit logical-systems logical-system-name routing-options],
   [edit routing-instances routing-instance-name routing-options],
   [edit routing-options]x
   x
   http://www.juniper.net/documentation/en_US/junos15.1/topics/reference/configuration-statement/router-id-edit-routing-options.html

   
   
   
   0

   
   
   
   0
4. Jesse Lepich says:

   November 28, 2017 at 1:47 am

   BTW, part of that new 80Q JNCIP-ENT JN0-647 dumps for your reference:

   https://drive.google.com/open?id=0B-ob6L_QjGLpejBJUUI1X2NuU3M

   Best Regards!

   
   
   
   0

   
   
   
   0