Which configuration would make an IP SLA probe use a precedence value of 3?
A.
ip sla 1icmp-echo 1.1.1.1tos 12
B.
ip sla 1icmp-echo 1.1.1.1tos 96
C.
ip sla 1icmp-echo 1.1.1.1precedence 3
D.
ip sla 1icmp-echo 1.1.1.1dscp 12
Explanation:
SUMMARY STEPS
1. Enable
2. Configure terminal
3. ip sla monitor operation-number
4. Type echo protocol ipIcmpEcho {destination-ip-address | destination-hostname} [source-ipaddr
{ip-address |
hostname} | source-interface interface-name]
5. Frequency seconds
6. Exit
7. ip sla monitor schedule operation-number [life {forever | seconds}] [start-time {hh:mm[:ss]
[month day | day
month] | pending | now | after hh:mm:ss] [ageout seconds] [recurring]
8. Exithttp://www.cisco.com/en/US/docs/ios/12_4/ip_sla/configuration/guide/hsicmp.html