– DS1( Distribute switch 1) is the primary device for Vlan 101, 102, 105
– DS2 ( Distribute switch 2) is the primary device for Vlan 103 and 104

During routine maintenance, it became necessary to shutdown G1/0/1 on DS1. All other
interface were up. During this time, DS1 remained the active device for Vlan 102’s HSRP
group. You have determined that there is an issue with the decrement value in the track
command in Vlan 102’s HSRP group. What need tobe done to make the group function
properly?

A.
The DS1’s decrement value should be configured with a value from 5 to 15

B.
The DS1’s decrement value should be configured with a value from 9 to 15

C.
The DS1’s decrement value should be configured with a value from 11 to 18

D.
The DS1’s decrement value should be configured with a value from 195 to less than 205

E.
The DS1’s decrement value should be configured with a value from 200 to less than 205

F.
The DS1’s decrement value should be greater than 190 and less 200