You are configuring a new bill of materials (BOM) for a new product. The product is a set of speakers.
You add all of the component items for the product to the BOM lines.
You need to set up the configuration route for the new product to meet the following requirements:

The power of the speakers must depend on the speaker enclosure.
The speaker enclosure must depend on the wiring harness.
What should you do?

A.
Create a default configuration route, and then select the speaker enclosure item for the speaker.

B.
Include the speaker enclosure and the wiring harness in a configuration rule.

C.
Create a new BOM for the speaker enclosure, and then create a new BOM for the wiring harness.

D.
Select an item from the wiring harness configuration group, and then from the speaker enclosure.

Explanation:
Example:
We are going to create a bill of material for the ‘FG_ITEM’. We want either ‘ITEM_1’ & ‘ITEM_3’ OR ‘ITEM_2’ & ‘ITEM_4’ to be selected as components for
‘FG_ITEM’. For this purpose we will define configuration route and configuration rules for component selection.
i.Open ‘Bill of materials’ form from Inventory and warehouse management > Common > Bill of materials
ii.Create new BOM for ‘BOM for FG_ITEM’
iii.Add ‘ITEM_1’, ‘ITEM_2’ assigning ‘Group_1’ as Configuration group, and ‘ITEM_3’ and ‘ITEM_4’ assigning ‘Group_2’ as Configuration group in BOM lines.
iv.Click ‘Configuration route’ tab and add ‘Group_1’ and ‘Group_2’.
v.Select ‘Group_1’ and click ‘Configuration rules’
Etc.