DRAG DROP
Your network contains four servers that run Windows Server 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network adapters
installed. An iSCSI SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network.
Each network communication setting may be used once, more than once, or not at all. You may
need to drag the split bar between panes or scroll to view content.
Answer: 
Explanation:
Allow cluster network communication for heartbeats.
Note: Heartbeats
The Cluster service, running on each node of the cluster, keeps track of the current state of the
nodes within a cluster and determines when a group and its resources fail over to an alternate node.
This communication takes the form of messages that are sent regularly between each node’s Cluster
service. These messages are called heartbeats.Network communication between nodes
http://technet.microsoft.com/en-us/library/cc787135(v=WS.10).aspx
imo it should be
network 1 – do no allow
network 2 – allow
network 3 – allow
0
2
You are wrong.
https://technet.microsoft.com/en-us/library/dn550728.aspx
1
0
Best practice is only having storage traffic on storage network and nothing else.
1
0
If you read the question carefully, it says the word “only” for network 2 and 3.
Correct answer should be:
network 1 – allow
network 2 – do not allow
network 3 – do not allow
0
2
https://technet.microsoft.com/en-us/library/dn550728.aspx
Says:
Network Traffic Type
Management
Provides connectivity between the server that is running Hyper-V and basic infrastructure functionality.Used to manage the Hyper-V management operating system and virtual machines.
Cluster
Used for inter-node cluster communication such as the cluster heartbeat and Cluster Shared Volumes (CSV) redirection.
Scroll down
Network Type & Recommended Setting
Management
Both of the following:
Allow cluster network communication on this network
Allow clients to connect through this network
Cluster
Allow cluster network communication on this network
CLEAR the Allow clients to connect through this network check box.
MrIntel is correct it should be
network 1 – allow
network 2 – do not allow
network 3 – do not allow
0
0
Huh??
Heartbeat IS Cluster traffic; so Network 2 should Allow cluster network communication
network 1 – allow
network 2 – allow
network 3 – do not allow
Or am I wrong?
0
0
I like it Jerry due to this link https://technet.microsoft.com/en-us/library/dn550728.aspx
Which shows the table showingCluster network traffic over all networks except the storage Nic..
0
0
joe says:
July 23, 2015 at 11:29 pm
allow communication on all but the storage dedicated interface
0
0
This info is worth everyone’s attention. Where can I find out more?|
0
0
It’s remarkable in favor of me to have a web page, which is good for my knowledge. thanks admin|
0
0
Given Ans Is Correct
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/dn550728(v=ws.11)
0
0