You work as an administrator at ABC.com. The ABC.com network consists of a single domain
named ABC.com. All servers on the ABC.com network have Windows Server 2012 installed.
ABC.com has a server, named ABC-SR07, which has two physical disks installed. The C: drive
hosts the boot partition, while the D: drive is not being used. Both disks are online.
You have received instructions to create a virtual machine on ABC-SR07. Subsequent to creating
the virtual machine, you have to connect the D: drive to the virtual machine.
Which of the following is TRUE with regards to connecting a physical disk to a virtual machine?
A.
The physical disk should not be online.
B.
The physical disk should be uninstalled and re-installed.
C.
The physical disk should be configured as a striped disk.
D.
The physical disk should be configured as a mirrored disk.
Your virtual machines can also be connected to physical hard disks on the virtualization server—not just to virtual hard disks. (This is sometimes referred to as having a “pass-through” disk connected to a virtual machine.)
The physical hard disk that you connect to a virtual machine can also be a network-attached disk, like a logical unit number (LUN) in a storage area network (SAN). A common example is an iSCSI LUN that has been mapped to the virtualization server by using Microsoft iSCSI Initiator. Because the virtualization server sees network-attached storage as local disks, the iSCSI LUN can be connected to a virtual machine.
The most important limitation about having a physical hard disk connected to a virtual machine is that it cannot be connected to the virtualization server or to other virtual machines at the same time.
The virtual machine must have exclusive access to the physical hard disk.
Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx
http://technet.microsoft.com/pt-pt/library/ff404147%28v=ws.10%29.aspx
1
0
A is the correct answer
because If the disk is online, to take the disk offline, right-click the disk, and then click Offline. After the disk state changes to Offline, the disk is disconnected from the virtualization server.
https://technet.microsoft.com/pt-br/library/ff404147%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
0
0
any 1 with a link to download
0
0
Free Microsoft 70-410 Exam Question – Free 3 Months Updates
Watch Video And Share | https://www.youtube.com/watch?v=cwCnoUrmy6I
0
0
I think these dumps are very good for the people who do not have much time for their Microsoft 70-410 exam preparation. You can easily pass the exam only by memorize these exam questions. Believe or not, I did so and I passed my 70-410 exam:
QUESTION 1
How can you manage an newly installed Windows Server 2012 R2 core from a another Windows Server 2012 R2 with computer manager?
Answer:
QUESTION 2
Your network contain an active directory domain named Contoso.com. The domain contains two servers named server1 and server2 that run Windows Server 2012 R2.
You create a security template named template1 by using the security template snap-in.
You need to apply template1 to server2.
Which tool should you use?
A. Security Templates
B. Computer Management
C. Security Configuration and Analysis
D. System Configuration
Answer: C
QUESTION 3
Your network contains an active directory domain named Contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named service1 to run as the gservice1 account.
How should you configure service1?
A. From Services Console configure the recovery settings
B. From a command prompt ,run sc.exe and specify the config parameter
C. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
D. From a command prompt ,run sc.exe and specify the sdset parameter
Answer: B
Explanation:
Sc config, Modifies the value of a service’s entries in the registry and in the Service Control Manager database.
obj= { | }
Specifies a name of an account in which a service will run, or specifies a name of the Windows driver object in which the driver will run. The default setting is LocalSystem.
password=
Specifies a password. This is required if an account other than the LocalSystem account is used.
QUESTION 4
Your network contains an active directory domain named Contoso.com.
The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that user named user1 can link and unlink Group Policy Objects(GPOs) to OU1. The solution must minimize the number of permissions assigned to user1.
What should you do?
A. Run the Delegation of Control Wizard on the Policies containers
B. Run the Set-GPPermission cmdlet
C. Run the Delegation of Control Wizard on OU1
D. Modify the permission on the user1 account
Answer: C
QUESTION 5
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has 2 dual-core processors and 16 GB of RAM.
You install the Hyper-V server role in Server1.
You plan to create two virtual machines on Server1.
You need to ensure that both virtual machines can use up to 8 GB of memory.
The solution must ensure that both virtual machines can be started simultaneously.
What should you configure on each virtual machine?
A. Dynamic Memory
B. NUMA topology
C. Memory weight
D. Ressource Control
Answer: A
QUESTION 6
You have a server named Server1 that runs Windows Server 2012 R2.
You promote Server1 to domain controller.
You need to view the service location (SVR) records that Server1 registers on DNS.
What should you do on Server1?
A. Open the Srv.sys file
B. Open the Netlogon.dns file
C. Run ipconfig/displaydns
D. Run Get-DnsServerDiagnostics
Answer: B
QUESTION 7
Your network contains an active directory domain named Contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You have a virtual machine named VM1. VM1 has a snapshot.
You need to modify the Snapshot File Location of VM1.
What should you do First?
A. Copy the snapshot file
B. Pause VM1
C. Shut down VM1
D. Delete the snapshot
Answer: D
QUESTION 8
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2. Several users are members of the local Administrators group.
You need to ensure that all local administrators receive User Account Control (UAC) prompts when they run a Microsoft Management Console (MMC).
Which setting should you modify from the Local Security Policy? To answer, select the appropriate settings in the answer area.
Answer: B
QUESTION 9
You have a network printer connected to print server.
You need to be able to print if print server goes down.
What should you chose?
A. brach office direct printing
B. printer pooling
C. spooling
D. Print forwarding
Answer: A
QUESTION 10
You have external virtual switch with srv-io enabled with 10 Virtual Machines on it.
You need to make the Virtual Machines able to talk only to each other.
A. remove the vswitch and recreate it as private.
B. add new vswitch
C. remove vswitch and recreate it as public
D. adjust srv-io settings
Answer: A
Full version (484q) is on my Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDcXAzcDVNOWI1blU
0
0
BTW, I will always update the newest questions of 70-410 exam on my blog, welcome to follow me: http://www.passpmp.net/category/microsoft/70-410-dumps
Good luck!
0
0