Where would you disable or enable Cisco Discovery Protocol?
A.
LAN connectivity policy
B.
service profile
C.
network control policy
D.
LAN uplinks manager
Get 50% Discount on All Your Purchases
at PrepAway.com - Latest Exam Questions
This is ONE TIME OFFER
50%
Network Control Policy
This policy configures the network control settings for the Cisco UCS instance, including the following:
Whether the Cisco Discovery Protocol (CDP) is enabled or disabled
How the VIF behaves if no uplink port is available in end-host mode
Whether the server can use different MAC addresses when sending packets to the fabric interconnect
The network control policy also determines the action that Cisco UCS Manager takes on the remote Ethernet port or the vEthernet interface when the associated border port fails. By default, the Action on Uplink Fail property in the network control policy is configured with a value of link-down. This default behavior directs Cisco UCS Manager to bring the remote Ethernet or vEthernet port down if the border port fails.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-3-1/b_UCSM_GUI_Configuration_Guide_1_3_1/UCSM_GUI_Configuration_Guide_1_3_1_chapter19.html
0
0