What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS CSeries server?
A.
‘Shared LOM’ NIC mode with ‘Active-active’ NIC redundancy and DHCP enabled
B.
‘Shared LOM’ NIC mode with ‘Active-standby’ NIC redundancy and DHCP enabled
C.
‘Dedicated’ NIC mode with ‘Active-standby’ NIC redundancy DHCP disabled
D.
‘Dedicated’ NIC mode with ‘None’ NIC redundancy and DHCP enabled
F.
‘Cisco Card’ NIC mode with ‘Active-active’ NIC redundancy and DHCP enabled
Actually DEFAULT setting for C-Series UCS (how it’s shipped) is:
Shared — Active/Active
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220/install/C220/install.html
1
0
BTW, NEW 642-999 PDF Dumps from Google Drive for Free: https://drive.google.com/open?id=0B-ob6L_QjGLpQVQ1ZUc4Znh6V00
0
0
Correct answer is A:
The server is shipped with these default settings:
The NIC mode is Shared LOM EXT.
Shared LOM EXT mode enables the 1-Gb Ethernet ports and the ports on any installed Cisco virtual interface card (VIC) to access Cisco Integrated Management Interface (Cisco IMC). If you want to use the 10/100/1000 dedicated management ports to access Cisco IMC, you can connect to the server and change the NIC mode as described in Step 1 of the following procedure.
The NIC redundancy is active-active. All Ethernet ports are utilized simultaneously.
DHCP is enabled.
IPv4 is enabled. You can change this to IPv6.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/install.html#46057
0
0
BTW, part of that new 195Q 642-999 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpQVQ1ZUc4Znh6V00
Best Regards!
0
0