PrepAway - Latest Free Exam Questions & Answers

what are the correct values for the following parameter…

According to the best practices, what are the correct values for the following parameters on a QLogic HBA?

PrepAway - Latest Free Exam Questions & Answers

A.
Connection options: 0 – Loop only
Login retry count: 60 attempts
Port down retry count: 60 attempts
Link down timeout: 30 seconds

B.
Connection options: 1 – point-to-point only
Login retry count: 60 attempts
Port down retry count: 60 attempts
Link down timeout: 30 seconds

C.
Connection options: 1 – point-to-point only
Login retry count: 30 attempts
Port down retry count: 5 attempts
Link down timeout: 60 seconds

D.
Connection options: 0 loop only
Login retry count: 30 attempts
Port down retry count: 30 attempts
Link down timeout: 30 seconds

Explanation:
http://en.community.dell.com/techcenter/extras/m/white_papers/20437971/download (page 11)

PrepAway - Latest Free Exam Questions & Answers

3 Comments on “what are the correct values for the following parameter…

  1. muds mik says:

    C
    QLogic Fibre Channel card BIOS settings
    The following BIOS settings are set by the Fast!UTIL BIOS utility, which can be accessed during the system
    boot process. Make sure the settings are adjusted on all adapter ports.

    QLogic BIOS settings
    Parameter Value
    Connection Options (point to point only) 1
    Login Retry Count 30
    Port Down Retry Count 5
    Link Down Timeout 60
    Execution Throttle 256




    0



    1
  2. GH says:

    B.

    QLogic Fibre Channel HBAs
    Configure a QLogic Fibre Channel HBA to match the following settings:

    Table 3. Fibre Channel HBA Settings
    Field Settings
    Connection options 1 for point-to-point only
    Login retry count 60 attempts
    Port down retry count 60 attempts
    Link down timeout 30 seconds
    Execution Throttle 256




    1



    0

Leave a Reply to muds mik Cancel reply

Your email address will not be published. Required fields are marked *