An L1 router has formed an adjacency with an L1-L2 router.
Under which condition will the L1-L2 router set the attach bit in its Level 1 link-state PDUs?

Click the Exhibit.

Referring to the exhibit, which type of NG MVPN route will be advertised by PE2 to PE1?

A customer’s traffic is traversing your network, which consists of Junos devices. You must configure class of
service for the traffic to meet a service-level agreement.
In this scenario, which two statements are true? (Choose two.)

Click the exhibit button.
user@PE2# run show 12circuit connections
Layer-2 Circuit Connections:
Legend for connection status (St)
EI – – encapsulation invalid NP – – interface
h/w not present
MM – – mtu mismatch Dn – – down
EM – – encapsulation mismatch Vc-Dn – –
Virtual circuit Down
CM – – control-word mismatch UP – –
operational
VM – – vlan id mismatch CF – – Call admission
control failure
OL – – no outgoing label IB – – TDM
incompatible bitrate
NC – – intf encaps not CCC/TCC TM – – TDM
misconfiguration
BK – – Backup Connection ST – – Standby
Connection
CB – – rcvd cell-bundle size bad SP – – Static
Pseudowire
LD – – local site signaled down RS – – remote
sity standby
RD – – remote site signaled down HS – – Hotstandby Connection
XX – – unknown
Legend for interface status
UP – – operational
Dn – – down
Neighbor: 10.10.1.1
Interface Type St Time
last up #Up trans
ge-1/1/1.6 (vc 2) rmt VM
[edit protocols 12circuit]
user@PE2# show
neighbor 10.10.1.1. {
interface ge-1/1/1.6 {
virtual-circuit-id 2;
encapsulation-type ethernet-vlan;
}
}
[edit logical-systems jpe interfaces]
user@PE2# showge-1/1/1 {
unit 6 {
encapsulation vlan-ccc;
vlan-id 6;
family ccc;
}
}
user@PE1# run show 12circuit connections
logical-system kpe
Layer-2 Circuit Connections:
Legend for connection status (St)
EI – – encapsulation invalid NP – – interface
h/w not present
MM – – mtu mismatch Dn – – down
EM- – encapsulation mismatch VC-Dn – –
Virtual -circuit Down
CM – – control-word mismatch Up – –
operational
VM – – vlan id mismatch CF – – Call admission
control failure
OL – – no outgoing label IB – – TDM
incompatible bitrate
NC – – intf encaps not CCC/TCC TM – – TDM
misconfiguration
BK – – Backup connection ST – – Standby
Connection
CB – – rcvd cell-bundle size bad SP – – Static
Pseudowire
LD – – local site signaled down RS – – remote
site standby
RD – – remote site signaled down HS – – Hotstandby Connection
XX – – unknown
Legend for interface status
Up – – operational
Dn – – down
Neighbor: 10.10.1.3
Interface Type St Time
last up # Up trans
ge-1/0/1.5 (vc 2) rmt VM
[edit protocols 12circuit]
user@PE1# show
neighbor 10.11.1.1 {
interface ge-1/0/1.5 {
virtual-circuit-id 2;
encapsulation-type ethernet-vlan;
}
}
[edit interfaces]
user@PE1#
ge-1/0/1 (
unit 5 {
encapsulation vlan-ccc;
vlan-id 5;family ccc;
}
}
An LDP Layer 2 circuit between PE1 and PE2 is not passing traffic. Both PE1 and PE2 show the circuit state as
VM – – vlan id mismatch.
Referring to the exhibit, which action will solve this problem?

Click the Exhibit button.

As a network administrator, you are asked to configure the VPN-B routing instance so that P routers are
masked in CE2-to-CE5 trace routes. For the VPN-A routing instance, P routers should appear in CE1-to-CE4
trace routes.
Referring to the exhibit, which two actions achieve this task? (Choose two.)

You are asked to configure PIM-SM in your network. Your implementation must allow for load sharing betweenredundant RPs and, should an RP failure occur, the RP failover time should be minimized.
Which two configuration tasks are required in this scenario? (Choose two.)

Which routing instance type is used with a Layer 3 VPN?

What are two characteristics of L3VPNs? (Choose two.)

A new service provider asked you to design its IS-IS network. You determined that two distinct IS-IS areas will
be required and you must now create an ISO addressing plan for the participating intermediate systems
(routers).
In this scenario, which two statements are correct? (Choose two.)

Click the Exhibit button.

RP1 and RP2 are acting as PIM-SM rendezvous points (Rps) in their autonomous system.
Referring to the diagram, which purpose does the MSDP session between RP1 and RP2 serve?