Click the exhibit button.
[edit protocols pim]
user@R1# show
rp {
bootstrap {
family inet {
priority 250;
}
}
local {
address 10.220.1.1;
priority 1;
group-ranges {
224.1.1.11/32;
224.0.0.0/4;
}
}
}
interface all;
interface fxp0.0 {
disable;
}
[edit protocols pim]
user@R4# show
rp {
bootstrap {
family inet {
priority 249;
}
}
local {
address 10.220.1.4;
priority 5;
group-ranges {
224.1.1.12/32;
224.0.0.0/4;
}
}}
interface all;
interface fxp0.0 {
disable;
}
Referring to the exhibit, which router will be the RP?

A layer 2 circuit (RFC 4447) is established between two PE routers to provide connectivity between two
customer sites.
Which two statements related to this deployment are true?

Click the Exhibit button.
[edit]
user@PE-1# show protocolsrsvp {
interface all;
}
mpls {
label-switched-path p1 {
from 1.1.1.1;
to 4.4.4.4;
no cspf;
}
interface all;
}
bgp {
group Int {
type Internal;
local-address 1.1.1.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
}
neighbor 2.2.2.2;
neighbor 3.3.3.3;
neighbor 4.4.4.4;
}
}
ospf {
area 0.0.0.0 {
interface ge-0/0/2.0;
interf lo0.0;
}
}
[edit]
user@p-1# show protocols
mpls {
interface all;
}
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface ge-1o0.0;
}
}
[edit]
user@p-2# show protocols
mpls {
interface all;
}
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface ge-lo0.0;
}
}
[edit]user@p-2# show protocols
rsvr {
interface all;
}
mpls {
label-switched-path p2 {
from 4.4.4.4;
to 1.1.1.1;
no-ospf
}
interface all;
}
bgp {
group INT {
type internal;
local-address 4.4.4.4,
family inet {
unicast;
neighbor 2.2.2.2;
neighbor 3.3.3.3;
neighbor 1.1.1.1;
}
}
ospf {
area 0.0.0.0 {
interface ge-0/0/2.0;
interface 1o0;
}
}
Referring to the exhibit, you have configured an L3VPN that connects Site-1 and Site-2 together, but the BGP
routes are being hidden on the PE routers. The topology in this scenario is shown below.
Site-1 > PE-1 > P-1 > P-2 > PE-2 > Site-2
Which two acttions would allow communication Site-1 and Site-2? (Choose two.)

Which command will match communities 101:111, 111:1, and 999:1111?

Click the Exhibit button.
[edit]
user@PE-1# run show l2 circuit connections
Layer-2 Circuit Connections:
Legend for connection status (St)
EI – – encapsulation invalid NP – – interface
h/w not present
MM – – mtu mismatch Dn – – down
EM – – encapsulation mismatch VC-Dn – –
Virtual circuit Down
CM – – control-word mismatch Up – –
operational
VM – – vlan id mismatch CF – – Call
admission control failure
OL – – no outgoing label IB – – TDM
incompatible bitrare
NC – – intf encaps not CCC/TCC TM – – TDM
misconfiguration
BK – – Backup Connection ST – – Standby
Connection
CB – – rcvd cell-bundle size bad SP – – Static
Pseudowire
LD – – local site signaled down RS – – remote
site standby
RD – – remote site signaled down XX – – unknown
Legend for interface status
Up – – operational
Dn – – down
Neighbor: 4.4.4.4
Interface Type St Time
last up #Up trans
ge-0/0/1.512 (vc 1) rmt OL
[edit]
user@PE-1# show protocols ldp
interface ge-0/0/2.0;
[edit]
user@PE-1# show protocols l2circuit
neighbor 4.4.4.4 {
interface ge-0/0/1.512 {
virtual-circuit-id 1
}
}
[edit]
user@PE-1# show interfaces ge-0/0/1
vlan-tagging;
encapsulation vlan-ccc;
unit 512 {
encapsulation vlan-ccc;
vlan-id 512;
}[edit]
uxer@P-1 # show protocols ldp
interface all;
[edit]
user@P-2# show protocols ldp
interface all;
[edit]
user@PE-2# run show l2circuit connections
Layer-2 Circuit Connections:
Legend For connection status (St)
EI – – encapsulation invalid NP – – interface
h/w not present
MM – – mtu mismatch Dn – – down
EM – – encapsulation mismatch VC-Dn – –
Virtual circuit Down
CM – – control-word mismatch Up – –
operational
VM – – vlan id mismatch CF – – Call
admission control failure
OL – – no outgoing label IB – – TDM
incompatible bitrate
NC – – intf encaps not CCC/TCC TM – – TDM
misconfiguration
BK – – Backup Connection ST – – Standby
Connection
CB – – rcvd cell-bundle size bad SP – – Static
Psewdowire
LD – – Local site signaled down RS – – remote
site standby
RD – – remote site signaled down XX – – unknown
Legend for interface status
UP – – operational
DN – – down
Neighbor: 1.1.1.1
Interface Type St Time
last up #Up trans
ge-0/0/1.512 (vc 1) rmt OL
[edit]
user@PE-2# show protocols ldp
interface ge-0/0/2.0;
[edit]
user@PE-2# show protocols l2circuit
neighbor 1.1.1.1 {
interface ge-0/0/1.512 {
virtual-circuit-id 1;
}
}
[edit]
user@PE-2# show interfaces ge-0/0/1vlan-tagging;
encapsulation vlan-ccc;
unit 512 {
encapsulation vlan-ccc;
vlan-id 512;
}
Referring to the exhibit, you have configured an L2 circuit that connects Site-1 and Site-2, but the L2 circuit is
not functioning. The topology in this scenario is shown below.
Site-1 > PE-1 > P-1 > P-2 > PE-2 Site-2
Which action will allow communication between Site-1 and Site-2?