PrepAway - Latest Free Exam Questions & Answers

Category: CTAL-TM_Syll2012

Exam CTAL-TM_Syll2012: Certified Tester Advanced Level – Test Manager [Syllabus 2012]

Which of the following test activities would you expect to be the less important ones to achieve the test obje

Assume you are the Test Manager for a new software release of an e-commerce application.
The server farm consists of six servers providing different capabilities. Each capability is provided
through a set of web services.
The requirements specification document contains several SLAs
(Service Level Agreements) like the following:
SLA-001: 99.5 percent of all transactions shall have a response time less than five seconds under
a load of up-to 5000 concurrent users
The main objective is to assure that all the SLAs specified in the requirements specification
document will be met before system release. You decide to apply a risk-based testing strategy and
an early risk analysis confirms that performance is high risk. You can count on a well-written
requirements specification and on a model of the system behavior under various load levels
produced by the system architect.

Which of the following test activities would you expect to be the less important ones to achieve the
test objectives in this scenario?

Which of the following answers best describes the test activities (assuming it is possible to perform all of t

Consider an information system of a Pay-Tv company based on a SOA architecture.
The integrated system currently consists of three core systems:
– a CRM (Customer Relationship Management) system
– a BRM (Billing and Revenue Management) system
– a CAS (Conditional Access System) system all of them communicating with SOA Middleware.
You have been asked to manage the testing activities for the integration of two additional off-theshelf systems from two different vendors: a SMS (Short Message Service) server and an IVR
(Interactive Voice Response) system.
Assume that there is a high likelihood that the two off-the-shelf systems will be low-quality and that
you have a clear proof that the testing performed by the two vendors on their systems has been
unsystematic and unprofessional. This obviously leads to higher quality risk for the overall
integrated system.
You are the Test Manager of this project. Your main goal is to plan for testing activities to mitigate
this risk.
Which of the following answers best describes the test activities (assuming it is possible to perform
all of them) you should plan for?

Which of the following information is useless when the specified exit criteria is evaluated?

The following are the exit criteria described in the test plan of a software product:
EX1. The test suite for the product must ensure that at least each quality risk item is covered by at
least one test case (a quality risk item can be covered by more test cases).
EX2. All test cases in the test suite must be run during the execution phase.
EX3. Defects are classified into two categories: “C” (critical defect) and “NC” (non-critical defect).
No known C defects shall exist in the product at the end of the test execution phase.
Which of the following information is useless when the specified exit criteria is evaluated?

Which of the following answers would you expect to best describe the residual risks associated with the identi

Assume that you are the Test Manager for a small banking application development project.
You have decided to adopt a risk-based testing strategy and 5 product risks (R1, R2, R3, R4, and
R5) have been identified during the quality risk analysis.
The following table shows the risk level associated to these product risks (higher numbers mean
higher risk):

55 test cases have been designed and implemented to cover all these 5 product risks. The
coverage is described in a traceability matrix.

This is the test execution status table, after the after the first week of test execution:
About 56% of the planned test cases have been successfully executed.
Assume that no additional product risks have been identified during the first week of test execution.

Which of the following answers would you expect to best describe the residual risks associated
with the identified product risks, at the end of the first week of test execution?

Which of the following is a positive logical test that is complete and correct, and covers the REQSEL-4 requir

You are the Test Manager for a project to develop a client-server application that allows wine
vendors to order custom-assorted packages of wines of several winemakers to sell special
packages in their wine shops.

You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for
the system testinG.
EXCR1- Each “critical” quality risk item must be covered by at least one test condition
EXCR2- Each “critical” requirement must be covered by at least one test condition
The following are the “critical” requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2-bottles, 6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle
and no more bottles than the package size. No error messages shall be displayed if the user
selects a valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message “Invalid number of bottles” if an invalid
number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message “Invalid credit card” if invalid credit
card data are given by the user
QUSTION NO: 11
The following is the unique “critical” quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed
to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been
identifieD.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles
from the user
Assume that you have used traceability to determine the logical test cases that cover all the
requirements and the single risk item identified in that scenario.

Which of the following is a positive logical test that is complete and correct, and covers the REQSEL-4 requirement?

What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and EXCR2 exit crit

The following are the requirements identified as “critical”:
REQ-SEL-001. The user shall be able to combine all the three products with all the four durations
to define an item to purchase
REQ-SEL-002. The user shall be able to add a maximum of six different items to the shopping cart
REQ-PUR-001. The user shall be able to purchase all the items in the shopping cart using a credit
voucher
REQ-PUR-002. The user shall be able to purchase all the items in the shopping cart using the
available credit already charged on the smartcard
REQ-PUR-003. The user shall be able to purchase all the items in the shopping cart using all the
accepted credit cards (Visa, MasterCard and Great Wall Card)
REG-LOGO-001. The user shall be able to logout (by clicking the logout button) from both the
“select” and “purchase” pages going back to the “browse” page (anonymous navigation)
Moreover the following quality risk item has been identified as “critical”:
QR-P1. The web customer portal might not be able to provide the expected response time (less
than 10 sec) for the purchase transactions under a load of up-to 1000 concurrent users

Test analysis for system testing has just begun and the following test conditions have been
identifieD.
TC-SEL-01. Test the combinations of products and durations to define an item to purchase
TC-SEL-02. Test the maximum number of items, which can be added to the shopping cart
TC-PUR-01. Test the purchase of an item
TC-PUR-02. Test the purchase of an item with the credit charged on the smartcard
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?

Which of the following answers describes the best execution schedule in this scenario?

You are the Test Manager for a project to develop a web customer portal of a Pay-TV company
that allows customers (with a smartcard and a set-top box) to purchase digital contents.
In the “select” page the system displays a dialogue where the customer can select the items
(digital contents) he/she is interested in. In this page he/she can add one or more items to a
shopping cart. An item consists of a product and a duration.
There are three types of products: Movie, sport and premium (movie and sport).
There are four possible durations: 1 months, 2 months, winter (from the beginning of January to
end of March) and summer (from the beginning of July to end of September).
All the combinations of products and durations are allowed to define an item. Thus there are
twelve possible items. A maximum of six different items can be added to the shopping cart at a
time.
When the customer decides to check out he/she goes to the “purchase” page where he/she can
pay the total amount of the shopping cart in three different ways:

– using a credit voucher
– using a credit already charged on the smartcard
– using a credit card (accepted credit cards are. Visa, MasterCard and Great Wall Card)
The customer can logout from both the “select” and “purchase” pages. In this case no purchase is
made.
You decide to apply a blended risk-based and reactive testing strategy and the following is a
subset of the exit criteria for system testing:
EXCR1- Each “critical” quality risk item must be covered by at least one test condition
EXCR2- Each “critical” requirement must be covered by at least one test condition
You are following a risk-based testing strategy. The test execution time is very limited. Assume
that all the product risk items require more or less the same level of test effort.

Which of the following answers describes the best execution schedule in this scenario?

What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and EXCR2 exit crit

You are the Test Manager for a project to develop a client-server application that allows wine
vendors to order custom-assorted packages of wines of several winemakers to sell special
packages in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for
the system testinG.
EXCR1- Each “critical” quality risk item must be covered by at least one test condition
EXCR2- Each “critical” requirement must be covered by at least one test condition
The following are the “critical” requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2-bottles, 6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle
and no more bottles than the package size. No error messages shall be displayed if the user
selects a valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message “Invalid number of bottles” if an invalid
number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message “Invalid credit card” if invalid credit
card data are given by the user
The following is the unique “critical” quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed
to get the number of bottles from the user

Test analysis for system testing has just begun and the following test conditions have been
identified.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles
from the user
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?


Page 1 of 712345...Last »