You administer several switches on a network. The switches are configured with the default MLD snooping settings. Several VLANs are configured on each switch. Which of the following statements is most accurate? (Select the best answer.) A. The switches will not forward IPv6 multicast traffic. B. The switches will forward IPv6 multicast traffic to every […]

Which of the following is accomplished by implementing MPP on a router? (Select the best answer.) A. Only hosts on a particular subnet will be able to remotely manage the router. B. Only hosts that are connected to a particular interface will be able to remotely manage the router. C. Only hosts that perform 802.1X […]

Which of the following partial output from the show ip cache flow command would you expect to see for an HTTP connection sent from 10.1.1.36? (Select the best answer.) A. SrcIF SrcIPaddress DstIf DstIPaddress Pr SrcP DstP PktsEt0/0 10.1.1.36 Et1/0 10.2.1.74 06 C486 0050 1 B. SrcIF SrcIPaddress DstIf DstIPaddress Pr SrcP DstP PktsEt0/0 10.1.1.36 […]

RouterA and RouterB are connected routers. You issue the show clns neighbors command on RouterA and receive the following output: System Id Interface SNPA State Holdtime ….. Type Protocol RouterB Et0/0 0000.0000.000b Up 23 L1 IS-IS Which of the following statements must be true? (Select the best answer.) A. RouterA and RouterB are in the […]

Which of the following cannot be exchanged between spoke sites in a DMVPN design? (Select 2 choices.) A. unicast traffic B. multicast traffic C. VoIP traffic D. dynamic routing traffic Explanation: Multicast traffic and dynamic routing traffic cannot be exchanged between spoke sites in a Dynamic Multipoint virtual private network (DMVPN) design. Multicast traffic and […]

What prefix length must you use when assigning a global NAT-PT prefix? (Select the best answer.) A. ::/32 B. ::/48 C. ::/64 D. ::/96 E. ::/120 Explanation: You must use a::/96 prefix length when assigning a global Network Address Translation Protocol Translation (NATPT) prefix. NATPT is used to enable communication between IPv4only hosts and IPv6only […]

You want to move several company functions to the cloud, including software development and CRM. You decide to use a PaaS provider. Which of the following will you most likely have to provide and manage? (Select the best answer.) A. the CRM application B. the operating system C. the networking infrastructure D. the software development […]

Which of the following decimal values corresponds to the DSCP value EF? (Select the best answer.) A. 0 B. 14 C. 28 D. 46 Explanation: The decimal value 46 corresponds to the Differentiated Services Code Point (DSCP) value EF. DSCP values are 6bit header values that identify the Quality of Service (QoS) traffic class that […]

Which of the following statements are true regarding round robin queuing? (Select 2 choices.) A. Shared round-robin settings override shaped round robin settingsunless the weight of the shared queue is 0. B. Shared round-robin queuing guarantees bandwidth to queues but does not rate limit a queue if other queues are empty. C. Shared round-robin queuing […]

You have configured RouterA as an IS-IS node with the NET 49.1741.c867.5309.af89.00. Nodes with which of the following NETs would be able to establish an ISIS adjacency with RouterA? (Select 3 choices.) A. 48.1741.c867.5309.af89.00 B. 49.1741.c867.5309.af89.00 C. 49.1741.3867.5309.af89.00 D. 49.1741.c867.5309.7f89.00 E. 49.1741.c867.6309.af89.00 F. 49.2741.c867.5309.af89.00 Explanation: Nodes with the following network entity titles (NETs) would be […]