Which rule applies when designing a routed HP StoreVirtual 4000 Remote Copy environment to
replicate data from a branch office to the main data center?

A.
The two IP subnets must have IP routes to each target network with forwarding.

B.
The two IP subnets must have IP routes to each target network with direct access mode
configured.

C.
The two IP subnets must have IP routes to each target network without network address
translation.

D.
The two IP subnets must have IP routes to each target network without a private VPN tunnel
used.

Explanation:
IP networking requirements
You can use HP P4000 remote copy from one cluster to another cluster on a single IP subnet as
well as across routed environments. In a routed environment, the two IP subnets must have IP
routes to each target network without network address translation (NAT) or port forwarding. You
can employ private WAN connections using point-to-point protocols, or you can set up a VPN
tunnel between two networks that are separated by the public Internet. The VPN tunnel effectively
acts as one hop on a router and will allow the use of private IP space on each end.
http://h17007.www1.hp.com/docs/justrightit/HP%20StoreVirtual%20P4000%20Networking%20Re
commendations.pdf