2 Comments on “which module will be active by default?”

1. Hdbien says:

   June 18, 2014 at 8:24 pm

   Answers: A
   the one on the left

   Explanation:
   Redundant Onboard Administrator modules
   When two Onboard Administrator modules are installed, either module can be the active module.
   The other becomes the standby module.
   Configuration data is constantly replicated from the active Onboard Administrator module to the
   standby Onboard Administrator module, regardless of the bay in which the active module currently
   resides.
   If you install two Onboard Administrator modules of the same firmware revision, the one on the left
   of the enclosure will be the active one. If two Onboard Administrator modules installed into the
   same enclosure have different firmware versions, the automatic configuration sync is disabled.

   Both Onboard Administrator modules will put a clear entry into syslog stating exactlywhich version
   is on which Onboard Administrator and how to upgrade them. However, the different firmware
   versions do not affect which module is active or standby.
   The same rules apply.

   
   
   
   0

   
   
   
   0
2. networkmanagers says:

   February 12, 2017 at 1:57 am

   C

   
   
   
   0

   
   
   
   0