You ate installing a new HP BladeSystem c7000 enclosure. The customer wants to configure the
iLO and interconnect IP addresses so that they are automatically maintained during a hardware
swap How should you configure the enclosure?
A.
Use the Insight Display fixed IP feature.
B.
Configure the IP on each device and enable one enclosure IP mode.
C.
Use Insight Control Server Deployment to configure the enclosure.
D.
Use Enclosure-Bay IP Addressing.
The Onboard Administrator EBIPA (Enclosure-Bay IP Addressing) feature helps you provision a fixed IP address based on bay number, which preserves the IP address for a particular bay even if a module is hot replaced. The management interface for components plugged into the bays must be set for DHCP. EBIPA can only be used if the devices are set to boot from DHCP. If a device is configured for static IP, then it must be manually reconfigured to DHCP to change the EBIPA IP address.
If the server blade iLO is configured for an EBIPA fixed IP address, it carries that address when the blade is moved to another enclosure.
Answer: D
0
0
I choose D
0
0