A customer has a ProLiant DL32Ce Gen8 server with a Smart Array B120i controller installed The
customer wants to migrate from RAID 5 to RAID 6 for increased fault tolerance RAID 6 is not listed
as an option in the ACU.
What is the matt likely reason that RAID 6 is not an option?
A.
The Smart Array B120i controller does not offer RAID 6
B.
The controller firmware must be upgraded
C.
The Smart Array Advanced Pack must be purchased
D.
The Smart Array BIOS is configured incorrectly
Explanation:
Product Specifications – HP Dynamic Smart Array B120i Controller
Performance: 91,430 IOPs
Card type: PCIe 2.0 (4 GB/s unidirectional)
Memory bus speed: DDR3-800MHz with 40-bit wide bus
SAS/SATA Connectivity: Up to 6 SATA drives
RAID Support: RAID 0, 1, and 10 RAID 5 with optional 512MB on select models
Software Management tools: ACU, ADU, Agents, Intelligent Provisioning, HP SIM, SSD Wear Gauge
Optional features: 512MB Flash Back Write Cache (FBWC)
Answer: A
0
0
I have the same idea. A
0
0