You are a network administrator of an Active Directory domain named contoso.com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server
role and the Network Policy Server role service installed.
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1.
You need to create a DHCP policy that will apply toall of the NAP non-compliant DHCP clients.
Which criteria should you specify when you create the DHCP policy?
A.
The user class
B.
The vendor class
C.
The client identifier
D.
The relay agent information
Explanation:
http://technet.microsoft.com/pl-pl/library/dd296905(v=ws.10).aspx
A. The User Class
http://msdn.microsoft.com/en-us/library/dd296905(v=ws.10).aspx
1
0
To configure a NAP-enabled DHCP server
1. On the DHCP server, click Start, click Run, in Open, type dhcpmgmt. smc, and then press
ENTER.
2. In the DHCP console, open \IPv4.
3. Right-click the name of the DHCP scope that you will use for NAP client computers, and then
click Properties.
4. On the Network Access Protection tab, under Network Access Protection Settings, choose
Enable for this scope, verify that Use default Network Access Protection profile is selected,
and then click OK.
5. In the DHCP console tree, under the DHCP scope that you have selected, right-click Scope
Options, and then click Configure Options.
6. On the Advanced tab, verify that Default User Class is selected next to User class.
7. Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for
the default gateway used by compliant NAP client computers, and then click Add.
8. Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP
address for each router to be used by compliant NAP client computers, and then click Add.
9. Select the 015 DNS Domain Name check box, and in String value, under Data entry, type your
organization’s domain name (for example, woodgrovebank. local), and then click Apply. This
domain is a full-access network assigned to compliant NAP clients.
10.On the Advanced tab, next to User class, choose Default Network Access Protection Class.
11.Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for
the default gateway used by noncompliant NAP client computers, and then click Add. This
can be the same default gateway that is used by compliant NAP clients.
12.Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP
address for each DNS server to be used by noncompliant NAP client computers, and then click Add. These can be the same DNS servers used by compliant NAP clients.
13.Select the 015 DNS Domain Name check box, and in String value, under Data entry, type a
name to identify the restricted domain (for example, restricted. Woodgrovebank. local), and
then click OK. This domain is a restricted-access network assigned to noncompliant NAP
clients.
14.Click OK to close the Scope Options dialog box.
15.Close the DHCP console.
http : //technet . microsoft . com/en-us/library/dd296905%28v=ws . 10%29 .aspx
QUESTION 3
0
0