HOTSPOT
A virtual machine named VM1 is running in the failover cluster. The role for VM1 is configured as shown in the
following exhibit.
Information presented in the graphic.
Hot Area:
Answer: 
Explanation:
References:
https://msdn.microsoft.com/en-us/library/aa369653(v=vs.85).aspx https://msdn.microsoft.com/en-us/library/aa369668(v=vs.85).aspxhttps://msdn.microsoft.com/en-us/library/aa369665(v=vs.85).aspx
First the help, open picture in separate windows: https://cdn.briefmenow.org/wp-content/uploads/70-743-v4/Img147-218.jpg
In my opinion:
– restart at the same node, as default setting orders ClusterResourceRestartNotify
https://msdn.microsoft.com/en-us/library/aa372202(v=vs.85).aspx
– automatically at 20:00, as failover window is from 20 to 6 (24h clock. So, if failure was at 14 o’clock, it is outside the window. Failback will occur as AutoFailbackType is 1 but not outside window.
https://msdn.microsoft.com/en-us/library/aa369662(v=vs.85).aspx
4
0
I will choose Remain in Failed State and Automatically at 20:00.
Here more info: https://blogs.msdn.microsoft.com/clustering/2015/06/03/virtual-machine-compute-resiliency-in-windows-server-2016/
3
0
Your link is referencing Cluster Nodes, not roles on the cluster.
0
0
Image: http://freecram.com/uploads/70-740/1ce02c9aa957f783eaa58f75bdc9224b.jpg
0
0
By default, a node is quarantined, if it ungracefully leaves the cluster, three times within an hour
VMs hosted by the node are gracefully drained once quarantined
0
0
I decided to go for Failover to different node as QuarantineThreshold and QuarantineDuration are not specified. Also it states that it get quarantines after 3 unexpected leaves of the cluster, not three failures.
0
0
Correct Answer:
Role will be left in a failed state (this is due to the failures exceeding the FailoverThreshold within the FailoverPeriod – Per Cluster Role Properties: “If the clustered role fails more than the maximum in the specified period. it will be left in the failed state”).
Failback will occur at 20:00 per the FailbackWindowStart value of 20.
8
0
This is based on the screenshot provided by Pekah74 – which is the same screenshot used in the PrepAway ete file.
0
0
Now I agree with Chris. I didn’t remember well that all restarts allowed were done, after 3rd restart then…
So:
1st – remain failed state.
2nd – automatically at 20:00
11
0
I agree. Remain in failed state & failback at 20:00.
0
0