Examine the output shown below:

What is true of this configuration?

A.
The link-local address of R1 is FE80::2

B.
The link-local address of R1 is FE80::1

C.
The area ID is 1

D.
No adjacency has formed

Explanation:
The output shows that the link-local address of R1 is FE80::1. R1’s link-local address appears in the output of R2 because the show ipv6 eigrp neighbors command
displays information about the neighbor, not the local router.
The link-local address of R1 is not FE80::2. That is the link-local address of R2.
Because the area ID is not displayed in the output, we do not know its value. The only 1 in the output is the value representing the process ID of both routers, IPv6-
EIGRP neighbors for process 1.
It is not true that no adjacency has formed. There is an adjacency present; if there were not, the two routers would not appear in each other’s output of the show
ipv6 eigrp neighbors command.
Objective:
Routing Fundamentals
Sub-Objective:
Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

Home > Support > Cisco IOS IPv6 Command Reference > show ipv6 eigrp neighbors