Refer to the exhibit.

A server connects to GigabitEthernet1/0/1 on an HP Comware switch. The server sends tagged
traffic in VLAN2. It has an application that sets the DiffServ Code Point (DSCP) for its traffic to 16

and the 802.1p value to 2. The switch should use the DSCP to place the traffic in priority queue.
The traffic belongs to the queue that is one priority level higher than the queue for best effort traffic
(traffic without a QoS value)
What can the network administrator do to meet this requirement?

A.
Change GigabitEthernet1/0/1’s trust setting to “dot1p” set the port priority to 3. DSCP will not be
used

B.
Keep Gigabit Ethernet1/0/1’s QoS trust setting to “dot1p” Set the port priority to 3.

C.
Change the dot1p-lp map to map 802.1p value 2 to lp 2 and 802.1p value 0 to lp1.

D.
Change the dscp-dot1p map to map DSCP 16 to 802.1p value 1. RECEIBE priority 0

Explanation: