An HP Comware switch supports FCoE in Fibre Channel Forwarder (FCF) mode. A switch
interface Ten1/0/1 connects to a server FCoE Converged Network Adapter (CNA). The
CNA will carry normal data traffic and storage traffic for VSAN 2. which is associated with
VLAN 20. How does the administrator assign FCoE traffic for this CNA to VSAN 2?
A.
by accessing the VLAN 20 configuration view and specifying Ten1/0/1 as a member port
of the VLAN
B.
by setting Ten1/0/1 to FCoE mode and specifying VSAN 2 as the port access VSAN
C.
by accessing the VSAN 2 configuration view and specifying Ten1/0/1 as a member port
of the VSAN
D.
by binding a VFC interface to Ten 1/0/1 and specifying VSAN 2 as the VFC interface
trunk VSAN
answer C or D
anyone can confirm
0
0
I think C
0
0
CORRECT IS D
EXPLANATION:
Create interface VFC 101 (downlink interface), bind it to interface Ten-GigabitEthernet 1/0/1,
configure it to operate in F mode, and assign it to VSAN 20 as a trunk port.
[SwitchA] interface Vfc 101
[SwitchA-Vfc101] fc mode f
[SwitchA-Vfc102] bind interface Ten-GigabitEthernet1/0/1
[SwitchA-Vfc101] port trunk vsan 20
[SwitchA-Vfc101] quit
0
0
D
0
0