PrepAway - Latest Free Exam Questions & Answers

which two actions address the requirement?

Click the Exhibit button.

An administrator installed UTA2 PCIe cards into an existing FAS8200 HA pair. The new cards will be used for
native FC traffic. The administrator wants to configure the UTA2 ports for FC client access.
Referring to the exhibit, which two actions address the requirement? (Choose two.)

PrepAway - Latest Free Exam Questions & Answers

A.
Use the network fcp adapter modify command to bring the adapter online.

B.
Reboot the node to bring the adapter online after final configuration.

C.
Use the system hardware unified-connect command to verify that the port mode is set to initiator.

D.
Use the ucadmin modify command to set the adapter mode to FC.

Explanation:
B: Ports must be converted in pairs, for example, 0c and 0d, after which, a reboot is required, and the ports
must be brought back to the up state.
D: CNA ports can be configured into native Fibre Channel (FC) mode or CNA mode.
If the current configuration does not match the desired use (here we want to change from CNA mode to FC
mode), enter the following commands to change the configuration as needed:
system node hardware unified-connect modify -node node_name -adapter adapter_name -mode fc|cna -type
target|initiator
-mode is the personality type, fc or 10GbE cna.
-type is the FC4 type, target or initiator.
https://library.netapp.com/ecmdocs/ECMP1151595/html/GUID-1D06A7C4-F354-4793-A331-
68A2CD916084.html

One Comment on “which two actions address the requirement?

  1. Dean says:

    Note:

    “ucadmin” and “system hardware unified-connect” are aliases to the same command. The key difference between “B” and “C” is the setting (FC as opposed to Initiator) not the command.

    You would, I guess, only need to set “initiator” if configuring the NetApp to receive “array LUNs” from an external storage device




    0



    0

Leave a Reply