You have a server named Server1 that runs Windows Server 2012 R2.

You

plan to create a storage pool that will contain a new volume.

You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.

What is the minimum number of 256-GB disks required for the storage pool?

A. 2

B

. 3

C. 4

D. 5

Explanation:

It takes 3 discs (minimum) in order to create a storage pool array with parity. If this array were using fixed provisioning, this would not be enough given the 256MB capacity (since only 2/3rds of 256 X 3 – less than 6

00 -could be used as actual data with the rest being parity bits), but since this array uses thin provisioning, a 600GB volume could technically be set up on a 20GB disc and it would still show as 600GB. (So, essentially, the question really becomes how ma

ny drives it takes in a storage pool to create a parity array.)

References:

http://technet.microsoft.com/en-us/library/hh831391.aspx

http://www.ibeast.com/content/tools/RaidCalc/RaidCalc.asp

http://www.raid-calculator.com/default.aspx

https://www.icc-usa.com/raid-calculator

You have a server named Server1 that runs Windows Server 2012 R2.

You need to create a script that will create and mount a virtual hard disk.

Which tool should you use?

A. diskpart.exe

B. vdsldr.exe

C. fsutil.exe

D. vds.exe

You have a server named Server1 that runs Windows Server 2012 R2.

Server1 has three physical network adapters named NIC1, NIC2, and NIC3.

On Server1, you create a NIC team named Team1 b

y using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.

You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a networ

k adapter fails.

What should you do?

A. From Server Manager, change the load balancing mode of Team1.

B. Run the

New-NetLbfoTeam

cmdlet.

C. From Server Manager, add an interface to Team1.

D. Run the

Add-NetLbfoTeamMember

cmdlet.

You have a s

erver named Server1 that runs Windows Server 2012 R2.

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.

You need to ensure that the feature can be installed on Server1.

What should

you do?

A. Install Windows Identity Foundation (WIF) 3.5.

B. Install the Web Server (IIS) server role.

C. Connect Server1 to the Internet.

D. Run the

Add-AppxProvisionedPackage

cmdlet.

Explanation:

The files needed are no longer available on

the local Hard drive. We need to connect the server to the Internet.

Important to note that when starting with Windows Server2012 R2 and Windows 8, the feature files for .NET Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not

available on the local computer by default. The files have been removed. Files for features that have been removed in a Features on Demand configuration, along with feature files for .NET Framework 3.5, are available through Windows Update. By default, if

feature files are not available on the destination server that is running Windows Server

2012R2 Preview or Windows Server 2012 R2, the installation process searches for the missing files by connecting to Windows Update. You can override the default behavio

r by configuring a Group Policy setting or specifying an alternate source path during installation, whether you are installing by using the Add Roles and Features Wizard GUI or a command line.

You have a server named Server1 that runs Windows Server 2012 R2.

Server1 has following storage spaces:

Data

Users

Backups

Primordial

You ad

d an additional hard disk to Server1.

You need to identify which storage space contains the new hard disk.

Which storage space contains the new disk?

A. Primordial

B. Data

C. Users

D. Backups

Explanation:

All storage that meets acceptable

criteria for Storage Spaces will be placed in the Primordial Pool. This can be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual disks or pools at this point. The Primordial Pool will

only consist of physical storage devices that do not belong to any other pools.

You have a server named

Server1 that runs Windows Server 2012 R2.

You connect three new hard disks to Server1.

You need to create a storage space that contains the three disks.

The solution must meet the following requirements:

Provide fault tolerance if a single disk fails.

Maximize the amount of files that can be stored in the storage space.

What should you create?

A. A simple space

B. A spanned volume

C. A mirrored space

D. A parity space

Explanation:

Fault tolerant and better space ratio

Parity spaces are

designed for capacity efficiency and increased resiliency. Parity spaces are best suited for archival data and streaming media, such as music and videos.

You have a server named Server1 that runs Windows Server 2012 R2.

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.

You need to

ensure that the feature can be installed on Server1.

What should you do?

A. Run the

Add-AppxProvisionedPackage

cmdlet.

B. Disable User Account Control (UAC).

C. Connect Server1 to the Internet.

D. Remove the.NET Framework 4.5 Features feature.

E.

Install the Web Server (IIS) server role.

F. Install Windows Identity Foundation (WIF) 3.5.

You have a server named Server1 that runs Windows Server 2012 R2.

You plan to create an image of Server1.

You need to remove the source files fo

r all server roles that are not installed on Server1.

Which tool should you use?

A.

servermanagercmd.exe

B.

imagex.exe

C.

ocsetup.exe

D.

dism.exe

Explanation:

servermanagercmd.exe – The ServerManagerCmd.exe command-line tool has been deprecate

d in

Windows Server 2008 R2.imagex.exe – ImageX is a command-line tool in Windows Vista that you can use to create and manage Windows image (.wim) files. A .wim file contains one or more volume images, disk volumes that contain images of an installed Windo

ws operating system. dism.exe – Deployment Image Servicing and Management (DISM.exe) is a command-line tool that can be used to service a Windows image or to prepare a Windows Preinstallation Environment (Windows PE) image. It replaces Package Manager (Pkg

mgr.exe), PEimg, and Intlcfg that were included in Windows Vista.

The functionality that was included in these tools is now consolidated in one tool (DISM.exe), and new functionality has been added to improve the experience for offline servicing. DISM can

Add, remove, and enumerate packages. ocsetup.exe – The Ocsetup.exe tool is used as a wrapper for Package Manager (Pkgmgr.exe) and for Windows Installer (Msiexec.exe). Ocsetup.exe is a command-line utility that can be used to perform scripted installs and s

cripted uninstalls of Windows optional components. The Ocsetup.exe tool replaces the Sysocmgr.exe tool that Windows XPand Windows Server 2003i use.

The Dism utility can be used to create and mount an image of Server1.

References:

http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx

http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx

Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44

Exam Ref 70-410: Inst

alling and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22

You have a server named Server1 that runs Windows Server 2012 R2.

You need to remove Windows Explorer, Windows Internet Explorer, and all related components and files from Server1.

What should you run on Server1?

A.

Uninstall-WindowsFeature Server-Gui-Mgmt-Infra Remove

B. Uninstall-WindowsFeature Server-Gui-Shell Remove

C. msiexec.exe /uninstall iexplore.exe /x

D. msiexec.exe /uninstall explorer.exe /x

Explanation:

In Windows Server 2012 R2, you can remove

the Server Graphical Shell, resulting in the -Minimal Server Interface-.

This is similar to a Server with a GUI installation, but InternetExplorer 10, Windows Explorer, the desktop, and the Start screen are not installed.

Microsoft Management Console (MMC)

, Server Manager, and a subset of Control Panel are still present.

If the server has a full installation of Windows Server, and I need to bring the server down to minimal server interface, I only need to remove the Server-GUI-Shell.

You have a server nam

ed Server1 that runs Windows Server 2012 R2.

You configure IPSec rules for connections to Server1.

On Server1, you plan to create an inbound firewall rule that contains the following settings:

Allows inbound connections to an application named App1.exe

A

pplies to the domain profile

Overrides any block rules

You need to identify the minimum information required to create the rule.

Which two pieces of information should you identify? Each correct answer presents part of the solution.

A. the list of

computers that are authorized to use the application

B. the list of Active Directory users who are authorized to use the application

C. the hash of the application

D. the name of the IPSec policies that apply to Server1

E. the local path of the application

Explanation:

To add a program to the rules list, you must specify the full path to the executable (.exe) file used by the program.

Reference: Add or Edit Firewall Rule

https://technet.microsoft.com/en-us/library/cc753558.aspx

You have a server named Server1 that runs Windows Server 2012 R2.

You apply

a security policy to server1 by using the Security Configuration Wizard (CWM).

You plan to roll back the security policy.

You need to identify the settings that are prevented from rolling back running the CWM.

Which settings should you identify?

A. The sec

ure startup order

B. The outbound authentication methods

C. The network security rules

D. The system access control list

You have a server named Server1 that runs Windows Server 2012 R2.

You apply a security policy to Server1 by

using the Security Configuration Wizard (SCW).

You need to roll back the security policy.

Which settings will NOT be rolled back by the SCW?

A. the system access control list (SACLs)

B. the outbound authentication methods

C. the network security rules

D

. the service startup mode

Explanation:

The SCW rollback feature does not include the ability to roll back SACLs.

References: https://docs.microsoft.com/en-us/previous-versions/orphan-topics/ws.11/cc731389(v=ws.11)