A network administrator has configured source NAT, translating to an address that is on a locally connected
subnet. The administrator sees the translation working, but traffic does not appear to come back. What is
causing the problem?
A.
The host needs to open the telnet port.
B.
The host needs a route for the translated address.
C.
The administrator must use a proxy-arp policy for the translated address.
D.
The administrator must use a security policy, which will allow communication between the zones.
https://kb.juniper.net/InfoCenter/index?page=content&id=KB21785&actp=METADATA
0
0
When to configure Proxy ARP
As specified in Configuring Proxy ARP (CLI Procedure), Proxy ARP should be configured for the following scenarios:
When addresses defined in the static NAT and source NAT pool are in the same subnet as that of the ingress interface (Source NAT and Static NAT scenario)
When addresses in the original destination address entry in the destination NAT rules are in the same subnet as that of the ingress interface (Destination NAT scenario)
0
0
Hi! All!! The JN0-332 exam End of Life (EOL) on July 1, 2017, the new exam is JN0-333.
The newest JN0-333 dumps are available here FYI:
https://drive.google.com/open?id=0B-ob6L_QjGLpNzNvWWE1ck01MHM
Good Luck!!!
0
0