What is the minimum required configuration in a client LPAR to virtualize disk storage from a host IBM i LPAR
What is the minimum required configuration in a client LPAR to virtualize disk storage from a host
IBM i LPAR to the client IBM i LPAR?
what is the minimum number of virtual adapters that must be created in each VIOS partition?
A POWER7 system has two IBM i client partitions utilizing dual VIO Server (VIOS) partitions for all
disk & LAN resources. In order to provide uninterrupted operations when either of the VIOS
partitions is shut down, what is the minimum number of virtual adapters that must be created in
each VIOS partition?
What is the result when VIOS-1 returns to a running state?
A client IBM i partition is implemented across two VIO Servers (VIOS) and the network is
configured with SEA failover.
VlQS-1 is configured as the primary network path, and VIOS-2 as the secondary.
When VIOS-1 is removed for maintenance purposes, the client IBM i partition network traffic
moves to VIOS-2.
What is the result when VIOS-1 returns to a running state?
How can this be performed with least downtime?
A customer currently has a client IBM i 7.1 environment, being hosted by a partition running IBM i
6.1. Due to increased availability requirements, they would like to take the client environment and
restore it to its own single-image system.
How can this be performed with least downtime?
Where should the change to boot the AIX environment to “Normal” mode be made?
After installing a client AIX partition, supported by a hosting IBM i 7.1 partition, each subsequent
IPL of the AIX partition boots to “System Management Services” mode.
Where should the change to boot the AIX environment to “Normal” mode be made?
What is the purpose of Tagged I/O in a partition profile?
What is the purpose of Tagged I/O in a partition profile?
What must be done prior to implementing the customer’s requirements?
A customer is implementing a new POWER7 system that will run along with an older POWER5
system.
A new HMC has been purchased for the POWER7 system.
The older 7310-CR3 HMC for the POWER5 system will remain in service.
The customer wants the older 7310-CR3 provide back up to the new HMC.
What must be done prior to implementing the customer’s requirements?
How can all the other controllers on the partitions be checked to determine if they should have the same type
One partition on a multi-LPAR Power 720 has recently posted an error message about the
upcoming expiration of a cache battery.
How can all the other controllers on the partitions be checked to determine if they should have the
same type of maintenance performed?
Which of the following is true for the IBM System Planning Tool (SPT)?
Which of the following is true for the IBM System Planning Tool (SPT)?
Which solution will provide Ethernet connectively at the lowest cost?
An administrator has an IBM i 7.1 hosting partition with TP 4 installed. The administrator is
designing Ethernet communications for 5 client IBM i LPARs. The managed system has only one
Ethernet adapter with a single port available.
The partitions must be separated and secured from each other.
Which solution will provide Ethernet connectively at the lowest cost?