What are two methods to determine the partition to which virtual disks are assigned?
What are two methods to determine the partition to which virtual disks are assigned?
What is the effect of configuring partition LPAR4 as follows using the same processor pool?
A Power 720 administrator is going to create a new partition on a machine with 3 existing
partitions. The machine has 2 processors in a Shared Processor Pool. The three partitions as
defined below for their processor requirements are active, utilizing the Desired processing units.
What is the effect of configuring partition LPAR4 as follows using the same processor pool?
What is the correct process?
An administrator created a VIO Server partition in the System Planning Tool (SPT) and wants to
pair the dual disk controllers for the partition.
What is the correct process?
Which option would allow the customer to use some of the remaining processing capabilities of their Power 720
A customer with an IBM i environment running on a 6-core Power 720 wants to add an additional
IBM i workload in a new partition. The customer is licensed for4 cores to run IBM i, and the
existing LPARs are using 3.
Maximum internal DASD is currently installed in the CEO and is being used for production. The
customer has a V7000 storage subsystem with available capacity and an available slot for a fibre
adapter.
Which option would allow the customer to use some of the remaining processing capabilities of
their Power 720 but attach to disk storage elsewhere?
Which action will accomplish the goal?
An administrator has configured a POWER7 server with 6 partitions. The partitions are configured
with shared processor pools and virtual processors as shown:
The IBM i partition configured to use virtual processor capacity indicated in the graphic above as
vp8 is currently shut down, but the administrator needs to reserve the shared processor pool
capacity for use with the IBM i partition once it starts up.
Which action will accomplish the goal?
what else is necessary?
A customer has a single-partition Power 720 running IBM i. They would like to install some
additional adapters and implement 5 additional partitions. In addition to installing the adapters and
configuring an HMC, what else is necessary?
Which option is most likely to improve performance of the client IBM i partitions?
A customer is experiencing disk performance issues on a client IBM i LPAR. The hosting IBM i
partition is utilizing 50 internal disks. Both the host and the client partition disks are less than 50%
full.
Which option is most likely to improve performance of the client IBM i partitions?
What is the cause of the error?
An administrator has an IBM i partition hosted by VIO Server (VIOS), and managed by an HMC.
The administrator has hdisk2 through hdiskl7 assigned to a vSCSI adapter, and wants to map 2
more virtual disk units, but receives an error when trying to map the disks to the vSCSI controller.
What is the cause of the error?
What is necessary to avoid the warnings and to clean up the disk paths?
When using SAN flash copy to clone a disk image for an IBM i client LPAR, message ‘CP1096E -Disk unit connection is missing’ appears in the history log of the newly created client LPAR.
A check in SST shows the expected disk paths as ‘active’ and extra disk paths with a status of
‘missing’, a result of the reconfiguration of the disk subsystem.
What is necessary to avoid the warnings and to clean up the disk paths?
what is the minimum number of vSCSI adapters required to support this disk configuration?
A client IBM i partition is being planned. Dual VIO Servers will each provide 40 SAN disks to the
client partition, mirrored in IBM i at the adapter level (see example below).
Considering both the host and client partitions, what is the minimum number of vSCSI adapters
required to support this disk configuration?