70-741 (march, 2018)  

Hi 

these are the most recent questions of 70-741 of month, march 2018. please provide with correct answer.

Q23: you have a server named server 1 that runs windows seever 2016. You install the dhcp server server role on server 1  . You need to authorize dhcp on server 1.

1. exe
2. exe
3. exe
4. exe
5. Set-DhcpServerDatabase
6. Set-DhcpServerv4DnsSetting

Q 24: your network uses an internal address space of 10.10.0.0/24. Client computers are allocated addresses from 10.10.0.60 to 10.10.0.199

Server 4 has ip config as follows external ip (131.12.11.121) default gateway (131.12.11

254). Internal ip (10.10.0.200) gateway (10.10.0.254). You need to config srver4 to provide internet access to the computer on the network.

Choose three from following.

1. A) install the remote desktop services server role
2. B) open the routing and remote access console
3. C) install the remote access server role
4. D) open the remote access management console
5. E) enable directaccess and vpn

25: you have a remote access server named server 1 that runs windows server 2016.server 1 has directacces enabled. you have a proxy server named server2. all computers on the intenal network connect to the internet by using the proxy. on server 1 you run the cmd set-DAClient -ForceTunnel enabled. you need to enure that when a directaccess client connects to the network the client accesses all the internet resources through the proxy. what should you run....

1. A) Set-DAClient
2. B) Set.DANetworkLocationServer
3. C) Set-DnsClientNrptRule
4. D) Set-DnsClientNrptGlobal

q 26: you have a dns server named server1 that runs windows server 2016. server 1 has an active directory integrated zone namde adatum.com. all client computers run windows 10. you recently encountered unexpected responses to dns client queries in the adatum.com zone. you need to log all the records written to the one. which cmdlet you run?                          

1. A) Set-DnsServerDiagnostics
2. B) Add-DnsServerQueryResolutionPolicy
3. C) Set-DnsServer
4. D) Set-DnsServerDsSetting

q 28:  desktop scope 192.168.0.0/24 (192.168.0.1-192.168.0.140). visiters 192.168.1.0/24(192.168.1.1-192.168.0.140). all other scope settings are set to the default values. there is no available address space for another scope to be created. your network has 150 desktop computers that have access to the corporate network. your company also provides visitors with wifi access to the network. there can be upto 200 visitors eachday. you discover that some visitors afail to access the wifi network because there are no available addresses to allocate to the visitors. you need to prevent this issue from occuring.                                                             

1. A) configure a superscope that contains the visitors scope.
2. B) run Set-DhcpServerv4Scope -Name Mobile -LeaseDuration 0.02.00.00.
3. C) for the visitors scope run the dhcp split scope configuration wizard
4. D) run Set-DhcpServerv4Scope -ActivatePolicies $True -Name Mobile -MaxbootPClients 200

q 31: you have a server named server1 that runs windows server 2016. server1 is an ip address managment ipam server that collects dhcp and dns logs and events for network. you need to get the ip addresses that were assigned to a client computer named computer1 during the last week. what should you do on server 1                               

1. A) run the Export-IpamAddress
2. B) open Event viewer and click windows logs. filter the security log for computer1
3. C) run the Get-IpamDhcpConfigurationEvent  

D)from the ipam node in server manager, click event catalog and then review the ip adress tracking.

q 33: your network contains an active directory domain named contoso.com that contains a domain controller named DC1. all dns server for the network run bind 10. your perimeter network contains a dhcp server named dhcp1 that runs windows server 2016.  dhcp1 is a member of a workgroup named workgroup. dhcp1 provides ip address leases to guests accessing the wifi network. several engineers network remotely by using a vpn connection to a remote access server that runs windows server 2016. all of the vpn connections use certificate based authentication and are subject to access policies in network policy server. certificates are issued by an enterprise certification authority ca name ca1. all windows computers on the network are activated by using key management service on premises users use remote desktop services. you plan to deploy ipam to the network.                        

1. A) manage the dns zones on the dns server
2. B) audit certificate enrollment request on ca1

C)audit configuration changes to the remote access server

1. D) audit authentication events from dc1.

q 37: you have two servers named server1 and server2 that run windows server 2016. both servers have the dhcp server server role installed. server1 has a dhcp scope named scope1. server 2 has dhcp scope name scope2. you need to ensure that client computers can get an ip address if a single dhc server fails. you must be able to control the percentage of requests to which each dhcp server requests during normal network operations.                                             A) add server1 and server2 as nodes in a failover cluster and then configure the dhcp server server role.                                                     

B)add server1 and server2 as nodes in a failover cluster, and then configure port rules for udp 67 and udp 68.                                             

1. C) add server1 and server2 as nodes in a failover cluster, and then configure the quorum mode.                                                                                                                     

D)on server1 and server2, configure dhcp failover for scope 1 and scope 2

q 42: you have a dhcp server named server1 that runs windows server 2016. you plan to implement ipv6 on your network. you need to configure server1 for stateless dhcpv6. what should you do from the dhcp console?                                                   A) configure the general ipv6 properties                                             

1. B) create an ipv6 scope
2. C) configure the ipv6 server options
3. D) configure the advanced properties for server1

q43: your company has three offices. the offices are located in seattle chicago and montreal. you are configuring a new WAN link between the three offices by using the remote access server role in windows server 2016. you will use border gateway protocol as a routing protocol between sites. you need to configure the server in the seattle office for bgp routing.  what should you do?                                

1. A) from routing and remote access add a new ipv4 routing protocol.                                                 
2. B) from windows powershell, run the Add-BgpRouter cmdlet and specify the -localasn parameter.
3. c) from routing and remote access add a new ipv6 routing protocol.
4. D) from windows powershell, run the Add-BgpPeer cmdlet and specify the -localasn parameter

q48: you have a hyper v host named server1 that runs windows server 2016. server 1 has two network adapters that are remote direct memory access RDMA. you need to verify whether switch embedded teaming SET is enabled. which cmdlet should you use?                                                   

1. A) Get-VMNetworkAdapterFailoverConfiguration                               B)  Get-NetworkSwitchFeature                   
2. Get-VMNetworkAdapter
3. D) Get-VMSwitch

q51: you have a server named server1 that runs windows server 2016. you install the hyper v role on server 1. server1 has eight network adapters that are dedicated to virtual machines. the network adapters are remote direct memory acces enabled. you plan to use software defined networking SDN you will host the virtual machines for multiple tenants on the hyper v host. you need to ensure that the network connections for the virtual machines are resilient if one or more physical network adapters fail. what should you implement?                                                 

1. A) SR-IOV                                                  
2.  switch embedded teaming                      
3. NIC teaming on the hyper v host                                                           
4. virtual recieve side scaling vRSS

admin please find correct answers and upload them.