Refer to the exhibit.
What kind of cable should be used to make each connection that is identified by the numbers
shown?
A.
1 – Ethernet Crossover cable
2 – Ethernet straight-through cable
3 – Fiber Optic cable
4 – Rollover cable
B.
1 – Ethernet straight-through cable
2 – Ethernet straight-through cable
3 – Serial cable
4 – Rollover cable
C.
1 – Ethernet rollover cable
2 – Ethernet crossover cable
3 – Serial cable
4 – Null-modem cable
D.
1 – Ethernet straight-through cable
2 – Ethernet Crossover cable
3 – Serial cable
4 – Rollover cable
E.
1 – Ethernet straight-through cable
2 – Ethernet Crossover cable
3 – Serial cable
4 – Ethernet Straight-through cable
EESR
0
0
P 56
Serial cable – serial communication is the process of sending data one bit at a time, sequentially, over a communication channel or computer bus. This is in contrast to parallel communication, where several bits are sent as a whole, on a link with several parallel channels.
0
0
Yes, they both will connect a PC to a router. But for what purpose is the important part!
crossover cable (ethernet) will connect the PC to the router’s ethernet port and will therefore allow network communications (packets)
0
0
crossover cable (ethernet) will connect the PC to the router’s ethernet port and will therefore allow network communications (packets)
rollover cable (serial) will connect the PC to the router’s console port and will therefore allow terminal communications (null modem = dumb terminal)
0
0
Frame relay is a packet-switching telecommunication service designed for cost-efficient data transmission for intermittent traffic between local area networks (LANs) and between endpoints in wide area networks (WANs).
Frame Relay can be enabled on a serial interface
0
0