What command provides the output shown in the exhibit? (Click on the Exhibit(s) button.)

A. switch# show glbp

B. switch# show standby
C. switch# show glbp status
D. switch# show standby brief

Explanation:

The command show glbp displays the output in the exhibit. This command displays detailed information about GLBP groups on the switch. In this scenario, the switch is a member of GLBP group 100, and it is the active switch. The output indicates that the virtual IP address is 192.168.8.10 and that preemption is enabled.

The command show glbp status does not exist on Cisco routers.

The command show standby brief is used to display a summary of the HSRP groups to which the switch belongs. The summary information it provides includes the group number, priority, state, active device address, standby address, and group address. This command is for HSRP only.

The command show standby can be used to display detailed information about HSRP groups to which a switch belongs. This command is for HSRP only.

Objective:
Infrastructure Services
Sub-Objective:
Configure and verify first-hop redundancy protocols

References:
Cisco > Cisco IOS IP Application Services Command Reference > sctp through show ip slb vservers > show glbp
Cisco > Cisco IOS IP Application Services Configuration Guide, Release 12.4 > Part 1: First Hop Redundancy Protocols > Configuring GLBP