By default, on the WLAN controller for a voice application using Cisco 7921 wireless IP phones, what is the percentage of RF bandwidth that can be dedicated to the phones?

Which of the following settings will reduce packet overhead and overall latency in a standalone point-to-point bridge deployment?

On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter, the status LED and activity LED are alternating on and off. What does this indicate?

Which authentication types are allowed with the Cisco ADU when selecting WPA/WPA2/CCKM under the security options?

Which of the following statements explains why it is normally best to have more than one controller-based access point participate in the containment of one rogue access point?

You have a very few Cisco 7920 wireless IP phones on your network, but lots of wireless laptops. You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones. What is the lowest percentage of voice-allocated bandwidth you can select on the WLAN controller?

You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it, all the LEDs on the access point blink together. What does this indicate about the access point?

Which Cisco Aironet Series devices can be powered using 802.3af inline power?

You are configuring an RF group of controllers that coordinate Radio Resource Management calculations. What is the maximum number of WLAN controllers that you can add?

A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client that is anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run a debug command on the 4402 controller. Which message would best describe the establishment of the tunnel from the foreign controller’s perspective?