A controller-based access point is capable of monitoring all VLANs
If it is properly deployed, a controller-based access point is capable of monitoring all VLANs on a network when you select which of the following modes from the AP Mode drop-down menu on the controller?
which of the following RTS threshold and CWmin settings would be correct for the non-root bridges?
When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges, which of the following RTS threshold and CWmin settings would be correct for the non-root bridges?
You are required to put the steps in the correct order?
DRAG DROP
You work as a network engineer at TestKing.com. Your boss, Mrs. Tess King, is curious about the procedure to adding a wireless controller to the WCS. You are required to put the steps in the correct order?
C/image:55.png
You are required to put the steps in the correct order?
DRAG DROP
You work as a network engineer at TestKing.com. Your boss, Mrs. Tess King, is curious about the procedure to adding a wireless controller to the WCS. You are required to put the steps in the correct order?
C/image:24.png
Which distance setting should you use for the bridge configured as the root?
You are using standalone Cisco Aironet 1400 Series Wireless Bridges for a nine-mile point-to-point
wireless link between two buildings. Which distance setting should you use for the bridge configured as the
root?
Choose the service component in the optimize phase which assesses the WLAN
Choose the service component in the optimize phase which assesses the WLAN system and drives
continuous improvements by recommending remediation measures including device configuration
optimization, capacity planning, traffic analysis, security assessment, and quality issue resolution.
following modes from the AP Mode drop-down menu on the controller?
If it is properly deployed, a controller-based access point is capable of monitoring all VLANs on a network when you select which of the following modes from the AP Mode drop-down menu on the controller?
What has caused this problem?
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.
H-REAP AP2 has six other clients associated to it, which continue to pass traffic. What has caused this
problem?
Which situation would result in this type of problem?
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to the
wireless network, but clients using PEAP are failing to log on. Which situation would result in this type of
problem?
which of the following RTS threshold and CWmin settings would be correct
When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges, which of the following RTS threshold and CWmin settings would be correct for the non-root bridges?