With which of the following control components do UCM media resources interact when UCM needs to locate
resources to establish transcoding? (Select the best answer.)

Which of the following command sets presents the dial peer commands in the order that they are evaluated by
a voice gateway for an inbound dial peer? (Select the best answer.)

All of your department’s IP phones are connected to a switch that does not support PoE. A DHCP server has
been configured for the voice VLAN on the switch. Another administrator power cycles the switch without
warning. No calls are in progress.
Which of the following is most likely to occur? (Select the best answer.)

Your company has implemented Cisco Unity Connection. A user reports that outside callers are hearing a tone
after recording 30 seconds of a voice mail message.
Which of the following is most likely true? (Select the best answer.)

You are the administrator of a VoIP network. Your supervisor reports that calls to both internal and external
users are connecting; however, users are unable to hear any audio. No recent configuration changes have
been made to the VoIP network.
Which of the following is most likely the cause of the problem? (Select the best answer.)

Which of the following commands correctly configures voice VLAN 10 on a trunk port? (Select the best
answer.)

You are upgrading the firmware on all Cisco IP Phone 7961s that are connected to your company’s network. All
IP phones are configured to their default upgrade settings.
Which of the following upgrade methods will require the most administrative overhead? (Select 2 choices.)

You administer a UCM environment that contains only Cisco IP phones with factoryinstalled firmware.
Which of the following messages will not be sent or received by the IP phones? (Select 2 choices.)

Which of the following does the auto assign command configure a router to do? (Select the best answer.)

You want to add 90 IP phones to a UCM network.
You enable autoregistration in UCM and configure the Starting Directory Number field to 5000.
You also configure the Ending Directory Number field.
You connect the IP phones to the network. The secondtolast IP phone that you connect displays a dn of 5088.
However, the last IP phone that you connect never registers with UCM.
Which of the following is most likely the problem? (Select the best answer.)