What is the focus for Cisco for driving integrated networks?
What is the focus for Cisco for driving integrated networks? Select the best response.
Which three QoS mechanisms will be useful in redesigning the WAN to support the mission-critical application a
A client organization is investigating deploying IP communications. It has a traditional hub- and-spoke Frame Relay WAN. It has five remote sites, and the WAN link speed for each location is 512 kbps. The WAN supports typical IP-based applications, but the client will also be rolling out a new ERP application that will be considered mission critical. Which three QoS mechanisms will be useful in redesigning the WAN to support the mission-critical application and IP communications? (Choose three.)
Select 3 response(s).
which type of OSPF routing is being used on the router labeled “Mollie”?
which four types of information can be gathered?
When issuing the Cisco IOS command show power in the Cisco Catalyst 6509 Switch, which four types of information can be gathered? (Choose four.) Select 4 response(s).
Which Cisco advanced technology provides interconnected storage area networks so that you can reduce costs and
Which Cisco advanced technology provides interconnected storage area networks so that you can reduce costs and improve reliability?
Select the best response.
Which two of these protocols can be used to provide secure connectivity when connecting a branch office to the
Which two of these protocols can be used to provide secure connectivity when connecting a branch office to the campus core? (Choose two.) Select 2 response(s).
Which feature will you need in order to provide this connectivity?
Your network includes a Cisco Catalyst 6500 Switch with an FWSM module. You need Layer 2 connectivity between two routers located on different firewall interfaces. Which feature will you need in order to provide this connectivity? Select the best response.
Which advanced technologies will be applicable to answering this RFP?
You have received an RFP from a potential client to design a network for a new corporate campus. This campus will encompass administration, sales, and R&D, and it will pull all the distributed IT functions into a new data center. The campus will consist of five buildings, each with four floors. The buildings will be linked via high-strand-count, single-mode fiber-optic cable to the new data center in building 3. Each building will have an MDF with at least one telco closet per floor and at least two runs of Category 5 UTP cable will go to each work location. Multistrand multimode will connect each telco closet to the MDF. Each MDF will have dedicated power circuits and be backed up by batteries in the basement of each building and a generator.
The corporation will require 3500 TDM telephones and approximately 100 of these will be in a call center in building 2. The corporation needs to increase collaboration in the workforce.
Employees need the flexibility to be able to move from one floor to another or from one building to another to accomplish their jobs. Managers also need this flexibility without losing connectivity to the corporate network or their phones. Building 4 will house R&D. This portion of the network requires connectivity to the Internet, but it also must restrict which employees have access to certain parts of the R&D network. The data center will house all connections to the Internet and to the PSTN. The corporation also provides access to customers for customized applications support. A network operations center will monitor and maintain the network on a 365/24/7 basis. Which advanced technologies will be applicable to answering this RFP? (Choose three.) Select 3 response(s).
How should the remote spoke router be configured to prevent it from being the next-lowest-cost path to network
Which three of these are features of the Cisco Catalyst 4900 Series Switches?
Which three of these are features of the Cisco Catalyst 4900 Series Switches? (Choose three.)
Select 3 response(s).