DRAG DROP<br /><br />Drag and drop question. Drag the items to the proper locations.<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/H/1-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/H/1-1.png" alt="" /></a><br /><br />

DRAG DROP<br /><br />The left describes some types of connections, while the right describes some types of cables.<br />Drag the items on the left to the proper locations<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/G/25-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/G/25-1.png" alt="" /></a><br /><br />

DRAG DROP<br /><br />You are configuring the office. In particular the host C, with the IP address 192.168.125.34/27, needs to be configured so that it cannot access hosts outside its own subnet. You decide to use the following command:<br /><br />access-list 100 deny protocol address mask any<br /><br />You are required to fill in the protocol, address, and mask in this command using the choices below:<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/G/24-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/G/24-1.png" alt="" /></a><br /><br />

DRAG DROP<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/H/19-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/H/19-1.png" alt="" /></a><br />A host with the address of 192.168.125.34 /27 needs to be denied access to all hosts outside its own subnet. To accomplish the complete command in brackets, [access-list 100 deny protocol address mask any], by dragging the appropriate options on the left correct place holders on the right.<br /><br />

DRAG DROP<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/H/18-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/H/18-1.png" alt="" /></a><br /><br />As a CCNA candidate, you need to know EIGRP very well. Which tables of EIGRP route information are held in RAM and maintained through the use of hello and update packets? Please choose two appropriate tables and drag the items to the proper locations.<br /><br />

DRAG DROP<br /><br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/H/14-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/H/14-1.png" alt="" /></a><br />The left describes the types of cables, while the right describes the purposes of the cables.<br />Drag the items on the left to the proper locations. (Not all items can be used.)<br /><br />

If a Cisco router has learned about network 10.1.1.0 from multiple sources, the router will select and Install only one entry into the routing table. Indicate the order of preference that the router will use by dragging the routes on the left to the — of preference category on the right.<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/H/15-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/H/15-1.png" alt="" /></a><br /><br />

CP.Inc has decided to network three (3) locations to improve efficiency in inventory control. The routers have been named to reflect the location: -RA, -RB, -RC. The necessary networking has been completed at each location, and the routers have been configured with single area OSPF as the routing protocol. The -RA router was recently installed but connectivity is not complete because of incomplete routing tables. Identify and correct any problem you see in the configuration.

NOTE: The OSPF process must be configured to allow interfaces in specific subnets to paricipate

in the routing process.

DRAG DROP<br /><br />In order to enhance the security of the enterprise network, the network administrators use ACL(Access Control lists). What are two reasons that the network administrator would use access lists?<br /><a href="//cdn.briefmenow.org/wp-content/uploads/640-816/H/4-1.png"><img class="aligncenter size-full" src="//cdn.briefmenow.org/wp-content/uploads/640-816/H/4-1.png" alt="" /></a><br /><br />