Refer to the exhibit. Which three statements are true? (Choose three.)

You have implemented mutual route redistribution between OSPF and EIGRP on a border
router. When checking the routing table on one of the EIGRP routers within the EIGRP
routing domain, you are seeing some, but not all ofthe expected routes. What should you
verify to troubleshoot this problem? Select the best response.

Refer to the exhibit. A client has asked you to consult on an eBGP loading question.
Currently the AS 100 eBGP links have an average outbound load of 65% and 20%
respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and
10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer
wants to spread the load between the two eBGP linksmore evenly. The BGP attributes are
currently set at their default values.
If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200,
what BGP attribute could you configure to cause AS 100 outbound traffic to load the eBGP
links more evenly?

Which two methods use IPsec to provide secure connectivity from the branch office to the
headquarters office? (Choose two.)

Refer to the exhibit. Based on this command output,what can we conclude about R3?
R3#show ip ospf database
OSPF Router with ID (172.16.1.1) (process ID 123)
Router Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# Checksum
Link Count
172.16.1.1 172.16.1.1 128 0x800000020x00D748
1
192.168.0.4 192.168.0.4 128 0x8000000C0x000EA9
1
Net Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# Checksum
116.16.34.4 192.168.0.4 128 0x800000030x00CC36
Summary Net Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# Checksum
116.16.35.0 172.16.1.1 245 0x800000010x00E4C0
140.140.1.1 192.168.0.4 728 0x800000010x004013
140.140.2.1 192.168.0.4 728 0x800000010x00951D
140.140.3.1 192.168.0.4 728 0x800000010x008A27
192.168.0.4 192.168.0.4 728 0x800000010x0095cB
Router Link States (Area 2)
Link ID ADV Router Age Seq# Checksum
Link Count
172.16.1.1 172.16.1.1 127 0x800000020x00F725
1
192.168.0.5 192.168.0.5 128 0x8000000E0x00258B
1
Net Link States (Area 2)
Link ID ADV Router Age Seq# Checksum
116.16.35.5 192.168.0.5 128 0x800000030x00BB43
Summary Net Link States (Area 2)
116.16.34.0 172.16.1.1 245 0x800000010x00EFB6
140.140.1.1 172.16.1.1 124 0x800000010x00A77A
140.140.2.1 172.16.1.1 124 0x800000010x009C84
140.140.3.1 172.16.1.1 124 0x800000010x00918E
192.168.0.4 172.16.1.1 124 0x800000010x009C33

During the IPv6 autoconfiguration, what does the device append to the 64-bit prefix that it
receives from the router to create its IPv6 address? Select the best response.

Refer to the exhibit. OSPF is running throughout the network. You want to minimize the
propagation of LSAs into and out of Area 1.
Which OSPF feature would best to achieve this goal?

The administrator wants to verify the current stateof the OSPF database loading process.
Which show command should the administrator use? Select the best response.

Refer to the exhibit. A network administrator routes advertised from Area 1 into Area 2. As
the router configuration specialist, what two things would you do to accomplish this goal?
(Choose two.)

Which functionality is required within an IP routerthat is situated at the boundary of an IPv4
network and an IPv6 network to allow communication between IPv6-only and IPv4-only
nodes? Select the best response.